CYCOLOY™ C1000HF Resin. General Purpose Grade for Wide Applications

Best PC/ABS for Low Heat Products & Balance Processing & Performance

CYCOLOY™ C1000HF PC/ABS Resin is a High‑Flow, General‑Purpose Engineering Thermoplastic developed to Enhance Processing Efficiency in Low‑Heat Application Environments. This PC/ABS Blend is Designed to Retain balanced Performance Characteristics while offering Improved Flow Behaviour for Manufacturers requiring Faster, more Consistent Mold Filling, particularly in Thin‑Wall Designs.

Flow Performance is a Primary Differentiator of CYCOLOY™ C1000HF PC/ABS Resin, allowing Easier Processing of Complex or Thin‑Wall Components under Standard Molding Conditions. The Enhanced Flow Profile support Reduced Injection Pressure, Improved Surface Replication, and Greater Process Stability, making the material well Suited for Thin‑Wall applications where Uniform Fill and Part Definition are Critical.

Mechanical and Dimensional Behaviour of CYCOLOY™ C1000HF PC/ABS Resin is Optimized for Low‑Heat applications where Excess Thermal Capability is not required. The material provides Reliable Structural Integrity and Dimensional Consistency without Over‑Engineering, Supporting Practical Design Solutions across General‑Purpose Product Categories.

Manufacturing Flexibility is extended through the Use of CYCOLOY™ C1000HF PC/ABS Resin, enabling a Single material Choice to be applied across a Broad range of Low‑Heat and Thin‑Wall Designs. This Versatility support Program Simplification while maintaining Predictable Performance and Processing Outcomes.

Flammability Classification of CYCOLOY™ C1000HF PC/ABS Resin is defined by its UL Rating. CYCOLOY™ C1000HF is UL94 ‑ HB, 1.00 mm ~ 3.00 mm Rated, Supporting Use in applications where Baseline Flame Performance is required without Flame‑Retardant Formulation.

Regulatory and Market alignment is addressed through the ROHS Compliant Status of CYCOLOY™ C1000HF PC/ABS Resin, Supporting Use in Global Markets. This Compliance Completes the material Profile by Aligning High‑Flow Processing Capability, Thin‑Wall Suitability, balanced Performance, and Environmental Responsibility.

CYCOLOY™ C1000HF Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/A

Vicat Softening Temperature Rate

CYCOLOY™ C1000HF , Vicat Softening Temperature rate , B120 = 116

Material MFI / Melt Flow Rate

Melt Flow Rate, 260°C/5.0 kgf = 24

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

CYCOLOY™ C1000HF Flexural Modulus, ISO 178, 2.0 mm/min = 2300 Mpa

CYCOLOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.