top of page

Engineering Thermoset Epoxy Resin for Various Manufacturing Industries

High Toughness, Broad Chemical Resistance Epoxy Resin with Various Requirement

​

As the Distributor of  Swancor, we offer High-Performance Products used in the Composite Industry including a Broad Range of Applications such as Anti-Corrosion, Construction, Marines etc. Our Team is Well Qualified and Works with its Variety of Customers Worldwide.

​

With Success such as World's Largest FRP Acid Storage Tanks ( Indonesia) , Evaporation System, ( Taiwan), Treatment Equipment ( China ), Luxury Yacht Slipstream ( Australia ), Concrete Waste Water Tank Anti-Corrosion Lining ( Thailand ), Acrylic Latex ( Wisconsin, USA ) show that Swancor Chemical is the Best Choice and Solution. 

​

Applications

​

  • Chemical Tank & Pipes

  • Chemical Tank and Pipe

  • Wind Energy

  • Marine

  • Non-Ferrous Metal Smelting

  • Scrubber & Absorption Tower

  • Flue Gas Desulphurization

  • Power Plants

  • Semiconductors & Electronic Plant

  • Food Grade

  • Pickling & Electroplating

  • VCM Plant

  • Desalination Plant

  • Flooring

​

​

  • Petroleum Plant

  • Steel Plant

  • Textile Plant

  • Fertilizer Plant

  • Water Treatment

  • Pulp and Paper

  • Lining

  • CIPP

  • Building, Construction and Structural Reinforcement

  • UV Curing

  • SMC/BMC

  • Grating

​

Type of Fine Chemical Selection

Various Selection of Chemical Resin with Specific Advance Characteristic for High Requirement Applications. 

​

Vinyl Ester Resin & UP Resin - Esterification of an Epoxy Resin with Acrylic or Methacrylic Acids

​

Wind Turbine Blade Resin - Special Formulated Resin

 

Epoxy Composite Resin - General Formulation

 

Marine Resin - Marine Grade Specialty Resin

  • Vinyl Ester Resin for Marine

​

Electrical Insulating Materials - Insulation Formulated

SMC/BMC Resin - Low Viscosity, High Reactivity Molding Resin

​

​

BPA Vinyl Ester
Brominated Epoxy Vinyl Ester
Novolac Epoxy Vinyl Ester
Elastomer Modified Epoxy Vinyl Ester
Epoxy Vinyl Ester Resin
Flake Epoxy Vinyl Ester
Unsaturated Polyester

Bisphenol-A Epoxy Vinyl Ester Resin​

​

Swancor 901

​​

  • Excellent Mechanical Properties and Chemical Resistance.

  • Excellent Fatique Resistance.

  • Quick Strength Build-up.

  • Comply with US FDA Regulation.

  • DNV and Lloyd's Register Approval for Marine.

​

Swancor 901-3

​

  • Lower Viscosity, Better Fiber Wet-Put.

  • Easier Formulation and Cost Saving.

  • Comply with US FDA Regulation.

​

Swancor 901-35

​

  • Low Styrene Content Version of Swancor 901.

  • Excellent Mechanical Properties and Chemical Resistance as Swancor 901.

​

Swancor 901-200

​

  • High Heat Distortion Temperature >100℃

  • Excellent Mechanical Properties and Chemical Resistance.

  • Suitable for Various Fabrication Process.

​​

Swancor 901-TP

​

  • High Heat Distortion Temperature >100℃

  • Excellent Mechanical Properties and Chemical Resistance as Swancor 901.

  • Comply with US FDA Regulation.

​

​

Brominated Epoxy Vinyl Ester Resin

​

Swancor 905-2

​​

  • Excellent Mechanical Properties and Chemical Resistance as Swancor 901.

  • Achieve ASTM E-84 Class 1 with 6-10% Swancor Flame Retardant Additive.

  • Comply with US FDA_Regulation.

​

Swancor 905C

​

  • Excellent Flame Retardant Properties

  • Achieve ASTM E-84 Class 2 with 6-10% Swancor Flame Retardant Additive.

​

Swancor 905-N

​

  • Combination of High Temperature Resistance and Flame Retardant Properties to Maintain Excellent Mechanical Properties under Critical Environment 

  • Achieve ASTM E-84 Class 1 with 6-10% Swancor Flame Retardant Additive.

​

Novolac Epoxy Vinyl Ester Resin

​

Swancor 907-1

​​

  • Surperior Mechanical Properties and Chemical Resistance at Elevated Temperature.

  • High Heat Distortion Temperature

​

Swancor 900

​

  • Surperior Mechanical Properties and Chemical Resistance at Elevated Temperature.

  • Higher Heat Distortion Temperature with Excellent Fatique Resistance.

​

Swancor 977-S

​

  • Suitable for Extreme High Temperature Environment.

  • Higher Heat Distortion Temperature with Excellent Fatique Resistance.

​

Elastomer Modified Epoxy Vinyl Ester Resin

​

Swancor 980

​​

  • High Elongation with High Toughness / High Impact Strength.

  • Suitable for Non-Critical Corrosive Applications.

 

Swancor 980-1

​​

  • Excellent Adhesion Strength and Superior Impact Strength.

  • Superior Abrasion and Stress Resistance.

  • Convenient Use in the Construction Industries, it’s Designed for the Process of Vacuum Infusion (RTM), Pultrusion, and Filament Wilding Methods

 

Swancor 908

​

  • Higher Elongation with Toughness than Bisphenol A Epoxy Vinyl Ester Resin.

  • Good Heat Resistance.

  • Suitable for Contact Molding for Sporting Equipment.

​

Swancor 985

​

  • Excellent Elongation (13% ) and Adhesion.

  • Low Viscosity

​

Epoxy Vinyl Ester Resin Primer

​

Swancor 984-M

​​

  • Vinyl Ester Primer for Concrete, Carbon Steel and Old FRP.

  • Excellent Resilience and Adhesion to Metal.

​

Swancor 984-B

​​

  • Vinyl Ester Primer for Concrete, Carbon Steel, Stainless Steel and Old FRP.

  • Excellent Resilience and Adhesion to Stainless Steel.

​

Swancor CP95

​

  • Vinyl Ester Primer. Excellent Adhesion for Both Metal and Concrete.

​

Swancor 917

​

  • Vinyl Ester Primer. Excellent Adhesion for Both Metal and Concrete.

  • Improved Formulation for Heat Resistance and Chemical Resistance.

​

Flake Epoxy Vinyl Ester Resin

​

  • Best Chemical Resistance and Mechanical Properties.

  • Excellent Adhesion Characteristic

  • Low Permeability to Water and Vapor.

​

Swancor 901-FLT

​​

  • Trowel Glass Flake Vinyl Ester Resin.

  • Excellent Operating Performance, Best for Trowel Technique.

​

Swancor 907-FLT

​​

  • Trowel Glass Flake Vinyl Ester Resin.

  • Improved Heat Resistance

  • Excellent Operating Performance, Best for Trowel Technique.

​

Swancor 901-FLR

​​

  • Roller Glass Flake Vinyl Ester Resin.

  • Excellent Operating Performance, Best for Brush, Roller Construction Process.

​

Swancor 907-FLR

​​

  • Roller Glass Flake Vinyl Ester Resin.

  • Improved Heat Resistance

  • Excellent Operating Performance, Best for Brush, Roller Construction Process.

​

Swancor 901-FLS

​​

  • Spray Glass Flake Vinyl Ester Resin.

  • Excellent Operating Performance, Best for Brush, Spray Construction Process.

​

Swancor 907-FLS

​​

  • Roller Glass Flake Vinyl Ester Resin.

  • Improved Heat Resistance

  • Excellent Operating Performance, Best for Brush, Spray Construction Process.

​

Unsaturated Polyester Resin

​

  • Excellent Water Resistance, Corrosion Resistance 

​

Swancor 963

​​

  • Unsaturated Polyester Resin.

  • Has Excellent Mechanical Properties and Processing Characteristics

  • Top Grade of the FRP Molding Method, Hand Lamination, Winding, Pultrusion Engineering Methods.

​

Swancor 961

​​

  • Unsaturated Polyester Resin.

  • High Toughness.

  • Anti-Heat Up 120 ℃.

​​

Vinyl Ester Resin for Wind Turbine Blade

 

Swancor 901-200P

​

  • Low Viscosity

  • Excellent Mechanical Properties

  • Excellent Anti-Corrosion Performance


Epoxy System for Wind Turbine Blade - Infusion Epoxy Resin System

 

  • Low Viscosity

  • Low Shrinkage.

  • Excellent Operating Performance During Process. 

  • High TG ( Greater than 70 ℃) with Excellent Mechanical Properties.

  • GL Certified with Good Wetting Ability on Glass Fibers and Carbon Fibers. 

​

Swancor 2511-1A/BT    - Exothermic Peak Time 85 ~ 125

Swancor 2511-1A/BM  - Exothermic Peak Time 170 ~ 250

Swancor 2511-1A/BF    - Exothermic Peak Time 220 ~ 300

Swancor 2511-1A/BS    - Exothermic Peak Time 270 ~ 360

Swancor 2511-1A/BL    - Exothermic Peak Time 330 ~ 430

​

​Swancor 2502-A/B

​

  • Low Viscosity. 

  • Moderate Gel Time with Good Mechanical Properties.

  • High TG ( Greater than 100℃)

​

Epoxy System for Wind Turbine Blade - Hand Lay-Up Epoxy Resin System

​

​Swancor 2503-A/B

​

  • Low Viscosity Resin for Hand Lay-Up Molds Resin.

  • Moderate Gel Time with Good Mechanical Properties.

  • High TG.

  • Good Wetting Ability on Glass Fibers and Carbon Fibers.

​

Epoxy Sys. for Wind Turbine
Vinyl Ester Resin for Wind Turbine
bottom of page