CYCOLOY™ C1200HF Resin. General Purpose Processing Efficiency

High Heat PC/ABS Blend offering High Flow & High Impact Strength

CYCOLOY™ C1200HF PC/ABS Resin is a General Purpose Grade Developed for Excellent Processing Efficiency, High Flow & High Heat Applications

It is from the Family of CYCOLOY™, a Polycarbonate with Acrylonitrile Butadiene Styrene Resin Blend Formulation. An Unique Blend with Both Material Characteristic Advantages

Polycarbonate Resin offers High Heat Resistance, Excellent Ductility at Ambient Temperatures

Meanwhile, Acrylonitrile Butadiene Styrene Resin offers Superior Processing, High Gloss, Low Temperature Ductility & Better Chemical Resistance

As a Blend PC/ABS CYCOLOY™, offers

- Toughness - Excellent Mechanical & Electrical Properties, Balanced Impact with Flow,
- Excellent Ductility over Temperature Range. Impact is Maintained Down to -30°C while Heat Resistance can be in the Range of 95°C-140°C
- Balance - Outstanding Process-ability, Good Impact with Flow & Color Freedom
- Stability - Dimensional Stability, Predictable Thermal Stability, Good Chemical Resistance
- Long Term Properties with Excellent UV Stability
- Processing Options - Injection, Blow Molding, Easy of Painting, Recycling
- Ease of Plating, such as Chrome Plating
- Anti-Squeak Behaviour
- Chlorine and Bromine-free Flame Retardancy Available

CYCOLOY™ C1200HF are UL94 - HB Rated, 0.75 mm ~ 3.50 mm

CYCOLOY™ C1200HF Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed, 112

Vicat Softening Temperature Rate

CYCOLOY™ C1200HF , Vicat Softening Temperature rate , B120 = 130

Material MFI / Melt Flow Rate

Melt Flow Rate, 260°C/5.0 kgf = 19

Material Melt Volume Rate, MVR

Material Flexural Modulus

CYCOLOY™ C1200HF Flexural Modulus, ISO 178, 2.0 mm/min = 2340 Mpa

CYCOLOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.