CYCOLOY™ C2800 PC/ABS Resin. Flame Retardant UL V0 & 5VB Flame Rating

Non-Chlorinated, Non-Brominated FR PC/ABS with Standard High Heat

Environmental Compliance and Flame Safety are increasingly important Considerations in Electrical and Electronic Product Design. CYCOLOY™ C2800 PC/ABS Resin Addresses these requirements through a combination of Non-Chlorinated, Non-Brominated Flame Retardancy, High Heat Performance, and reliable Processing Characteristics, making it a versatile material for demanding Engineering applications.

Unlike Conventional Flame-Retardant Materials that may Utilize Halogen-Based Systems, CYCOLOY™ C2800 features a Non-Chlorinated, Non-Brominated Flame-Retardant Formulation. This allows manufacturers to meet Stringent Environmental and Regulatory requirements while maintaining the performance Advantages of a High-Quality PC/ABS Blend.

The material provides a balanced combination of Polycarbonate Toughness and ABS Processability, enabling efficient Molding of Complex Parts without Compromising Mechanical Strength. CYCOLOY™ C2800 PC/ABS Resin offers standard High Heat Performance, making it suitable for components exposed to Elevated Operating Temperatures in Electrical, Electronic, and Industrial Environments.

Flame Resistance is a Key Strength of this Grade. In addition to achieving UL94 V-0 Classification, CYCOLOY™ C2800 also delivers UL94 5VB Performance, making it attractive for applications where enhanced Fire Protection is required. These characteristics Help support the Design of safer Products for Power-Related and Electronic Systems.

Manufacturers benefit from the Material's good Processing Behavior, allowing consistent Production of Housings, Enclosures, and Structural components that require both Regulatory Compliance and Dependable Long-Term Performance.

Notes:

CYCOLOY™ C2800 PC/ABS Resin
Non-Chlorinated Formulation
Non-Brominated Formulation
Standard High Heat Performance
Excellent Processing Characteristics
UL94 V-0 Flame Rating
UL94 5VB Flame Rating
Suitable for Electrical & Electronic Applications
UL94 - V0 @ 1.80 mm ~ 3.00 mm
RoHS Compliant

CYCOLOY™ C2800 Resin has 0.40 ~ 0.60 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed @73

Vicat Softening Temperature Rate

CYCOLOY™ C2800 , Vicat Softening Temperature rate , B120 = 90

Material MFI / Melt Flow Rate

Melt Flow Rate, 260°C/2.16 kgf = 16

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

CYCOLOY™ C2800 Flexural Modulus, ISO 178, 2.0 mm/min = 2680 Mpa

CYCOLOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.