CYCOLOY™ C2951 Resin. Flame Retardant UL V0 & 5VA Flame Rating

Non-Chlorinated, Non-Brominated FR PC/ABS with Standard High Heat

CYCOLOY™ C2951 PC/ABS Resin is a Flame Retardant Engineering Thermoplastic developed to provide reliable Fire performance combined with Stable Processing behaviour. This Non‑Chlorinated, Non‑Brominated PC/ABS Blend is designed for applications that require certified Flame Resistance alongside balanced Mechanical and Thermal Properties.

Fire performance of CYCOLOY™ C2951 PC/ABS Resin is achieved through a Non‑Halogenated Flame‑Retardant System, supporting Modern Environmental and Regulatory Expectations without the use of Brominated or Chlorinated Additives. The material meets demanding classification requirements, Including UL94 V‑0 performance and additional 5VA Flame Rating capability for enhanced Fire Safety Applications.

CYCOLOY™ C2951 PC/ABS Resin support use in applications exposed to Moderately Elevated Temperatures, providing Stable Mechanical performance without excessive Design Complexity. This High‑Heat Profile makes the material suitable for components where Thermal Reliability must be maintained during Operation.

Processing characteristics of CYCOLOY™ C2951 PC/ABS Resin emphasize Ease of Molding, enabling consistent material Flow and Predictable Part Formation across standard Injection Processes. This Processing stability support efficient production while maintaining Dimensional Consistency and Surface Quality.

CYCOLOY™ C2951 PC/ABS Resin provides a balanced Combination of Strength and Dimensional Stability, allowing Components to maintain Integrity during Assembly and Service. This balance Support use in applications where Flame performance and Structural Reliability must be achieved Together.

Flammability Classification of CYCOLOY™ C2951 PC/ABS Resin is confirmed by its UL Rating. CYCOLOY™ C2951 is UL94‑V0 Rated, 1.50 mm ~ 3.00 mm, with Additional 5VA Capability, supporting applications requiring verified Flame performance under defined Conditions.

Environmental and Regulatory alignment is addressed through the ROHS Compliant Status of CYCOLOY™ C2951 PC/ABS Resin, enabling use in Global Markets where Safety, Processing Stability, Flame and Compliance Requirements must be Satisfied Simultaneously.

Notes :

CYCOLOY™ C2951 PC/ABS Resin
Non Halogenated Flame Retardant
UL94 Rated
High Heat
RoHS Compliant

CYCOLOY™ C2951 Resin has 0.40 ~ 0.60 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed @ 94

Vicat Softening Temperature Rate

CYCOLOY™ C2951 , Vicat Softening Temperature rate , B120 = 109

Material MFI / Melt Flow Rate

Melt Flow Rate, 260°C/2.16 kgf = 10

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

CYCOLOY™ C2951 Flexural Modulus, ISO 178, 2.0 mm/min = 2550 Mpa

CYCOLOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.