CYCOLOY™ C4210 Resin. General Purpose PC/ABS with 10% Glass Reinforced

High Heat with Excellent Strength & Rigidity with Low Shrinkage

CYCOLOY™ C4210 Resin is a 10% Glass Fiber Reinforced PC/ABS Blend engineered to deliver enhanced Structural performance for applications requiring Higher Stiffness, improved Dimensional Stability, and reliable Heat Resistance. This General-Purpose Engineering material combines the Toughness of Polycarbonate with the Processing Advantages of ABS, while the Glass Reinforcement further strengthens the material for more demanding Environments.

The Incorporation of 10% Glass Fiber Reinforcement significantly Improves Rigidity and Mechanical Strength compared to Unfilled PC/ABS Grades. components Molded from CYCOLOY™ C4210 Exhibit excellent Structural Integrity, making the material suitable for Parts that must maintain Dimensional Accuracy under Mechanical Loads and Elevated Operating Temperatures.

In addition to its Strength Benefits, CYCOLOY™ C4210 Resin offers Low Shrinkage Characteristics, helping manufacturers achieve Tighter Dimensional Tolerances and improved Part Consistency. This Feature is particularly valuable for Precision-Molded components where Fit, Alignment, and Long-Term Dimensional Stability are critical Requirements.

The material also delivers High Heat Performance, enabling Molded Parts to retain their Mechanical properties in Environments that may exceed the Capabilities of standard ABS Materials. Combined with good Processing Characteristics, the Resin supports efficient Manufacturing while maintaining excellent Finished-Part Quality.

By Utilizing a PC/ABS Alloy Technology together with Glass Reinforcement, CYCOLOY™ C4210 provides a balanced combination of Toughness, Stiffness, Thermal Performance, and Moldability, making it a Versatile Solution for Engineering applications that demand greater Structural Capability.

RoHS Compliance: CYCOLOY™ C4210 Resin supports RoHS Requirements, helping manufacturers Select a Responsible Engineering material that restricts the use of Specified Hazardous Substances while maintaining excellent performance and Reliability.

Notes:

CYCOLOY™ C4210 PC/ABS Resin
10% Glass Fiber Reinforced
High Heat Performance
Excellent Strength & Rigidity
Low Shrinkage Characteristics
Enhanced Dimensional Stability
Good Processing Performance
UL94 - HB @ 1.50 mm ~ 3.00 mm
RoHS Compliant

CYCOLOY™ C4210 Resin has 0.30 ~ 0.50 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/A

Vicat Softening Temperature Rate

CYCOLOY™ C4210 , Vicat Softening Temperature rate , B120 = 134

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

Melt Volume Rate, 260°C/5.0 kgf = 15

Material Flexural Modulus

CYCOLOY™ C4210 Flexural Modulus, ISO 178, 2.0 mm/min = 5800 Mpa

CYCOLOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.