CYCOLOY™ C4210HF Resin. Advanced PC/ABS with 10% Glass Reinforced

General Purpose Unique High Flow for Ease & Shorter Processing

CYCOLOY™ C4210HF Resin combines the Structural Benefits of 10% Glass Fiber Reinforcement with a High-Flow PC/ABS Formulation, providing an excellent balance of Strength, Dimensional Stability, and Processing Efficiency. Engineered as a General-Purpose Grade, this material is particularly suitable for manufacturers seeking improved Productivity without Sacrificing Mechanical Performance.

A Key Advantage of CYCOLOY™ C4210HF is its ability to deliver High Strength and Rigidity while maintaining Low Shrinkage Characteristics. The Glass Fiber Reinforcement enhances Stiffness and Dimensional Stability, helping Molded Parts retain Precise Dimensions and Structural Integrity under Mechanical Loading.

Unlike standard Reinforced PC/ABS Grades, CYCOLOY™ C4210HF Resin features an optimized High-Flow formulation that allows easier Filling of Complex Mold Geometries and Thin-Wall Sections. This improved Flow behavior can contribute to Shorter Cycle Times, reduced Molding Pressures, and greater Manufacturing Efficiency, making it attractive for High-Volume Production Environments.

The PC/ABS Alloy System combines the Toughness and Heat Resistance of Polycarbonate with the Processing Ease of ABS. when Paired with Glass Reinforcement, the Result is a material Capable of delivering reliable Mechanical Performance, excellent Dimensional Accuracy, and consistent Molded Part Quality across a Wide range of Engineering applications.

Manufacturers often select CYCOLOY™ C4210HF when they require a Reinforced Engineering Thermoplastic that Balances Structural performance with improved Processability. Its combination of Rigidity, Low Shrinkage, and High Flow makes it suitable for Precision-Molded components where both Productivity and performance are Important.

RoHS Compliance: CYCOLOY™ C4210HF Resin supports RoHS Requirements, helping manufacturers meet Environmental Objectives while maintaining excellent Engineering performance and Reliability.

Notes:

CYCOLOY™ C4210HF PC/ABS Resin
10% Glass Fiber Reinforced
High Flow Formulation
Low Shrinkage Characteristics
Enhanced Dimensional Stability
Improved Processing Efficiency
Shorter Processing Cycles
UL94 - HB @ 0.80 mm ~ 3.00 mm
RoHS Compliant

CYCOLOY™ C4210HF Resin has 0.30 ~ 0.50 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/A

Vicat Softening Temperature Rate

CYCOLOY™ C4210HF , Vicat Softening Temperature rate , B120 = 136

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

Melt Volume Rate, MVR at 260°C/5.0 kg = 33

Material Flexural Modulus

CYCOLOY™ C4210HF Flexural Modulus, ISO 178, 2.0 mm/min = 4250 Mpa

CYCOLOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.