BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
: Vietnam : Indonesia : Thailand : Malaysia : Philippine : India
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
CYCOLOY™ C6600 Resin. Hydrolytic Stability and Chemical Resistance
Non-Chlorinated, Non-Brominated FR PC/ABS with Balance Flow & Impact
CYCOLOY™ C6600 PC/ABS Resin is a Non-Chlorinated, Non-Brominated FR PC/ABS with Balanced Flow & Impact Strength
This Grade offers Better Chemical Resistance & Unique Hydrolytic Stability
It is from the Family of CYCOLOY™, a Polycarbonate with Acrylonitrile Butadiene Styrene Resin Blend Formulation. An Unique Blend with Both Material Characteristic Advantages
Polycarbonate Resin offers High Heat Resistance, Excellent Ductility at Ambient Temperatures
Meanwhile, Acrylonitrile Butadiene Styrene Resin offers Superior Processing, High Gloss, Low Temperature Ductility & Better Chemical Resistance
As a Blend PC/ABS CYCOLOY™, offers
- Toughness - Excellent Mechanical & Electrical Properties, Balanced Impact with Flow,
- Excellent Ductility over Temperature Range. Impact is Maintained Down to -30°C while Heat Resistance can be in the Range of 95°C-140°C
- Balance - Outstanding Process-ability, Good Impact with Flow & Color Freedom
- Stability - Dimensional Stability, Predictable Thermal Stability, Good Chemical Resistance
- Long Term Properties with Excellent UV Stability
- Processing Options - Injection, Blow Molding, Easy of Painting, Recycling
- Ease of Plating, such as Chrome Plating
- Anti-Squeak Behaviour
- Chlorine and Bromine-free Flame Retardancy Available
CYCOLOY™ C6600 are UL94 - V0 Rated, 1.50 mm ~ 4.00 mm
CYCOLOY™ C6600 Resin has 0.40 ~ 0.60 Shrinkage, Flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
N/A
Vicat Softening Temperature Rate
CYCOLOY™ C6600 , Vicat Softening Temperature rate , B120 = 107
Material MFI / Melt Flow Rate
N/A
Material Melt Volume Rate, MVR
Melt Volume Rate, MVR at 260°C/5.0 kg = 48
Material Flexural Modulus
CYCOLOY™ C6600 Flexural Modulus, ISO 178, 2.0 mm/min = 2700 Mpa
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.