CYCOLOY™ CM6220 Resin. High Modulus 6 GPa. Low Warpage High Stiffness

Non-Chlorinated, Non-Brominated FR PC/ABS with Impact Modified Grade

CYCOLOY™ CM6220 Resin is a Mineral-Filled, Non-Chlorinated and Non-Brominated Flame-Retardant PC/ABS Grade engineered for applications requiring Exceptional Stiffness, Low Warpage, and reliable Impact Performance. Designed as a High-Modulus Engineering Material, this Grade combines Dimensional Stability with Mechanical Durability, making it suitable for components that demand Structural Integrity and Precise Dimensional Control.

A Key Feature of CYCOLOY™ CM6220 is its High Modulus of approximately 6 Gpa, providing significantly enhanced Stiffness compared to standard PC/ABS Materials. This Elevated Rigidity helps Molded Parts Resist deformation under Load while maintaining Dimensional Accuracy throughout their Service Life. The Mineral-Filled formulation further contributes to excellent Structural Stability and consistent Performance.

Another Major Advantage is the Material's Low Warpage Characteristics. Components Molded from CYCOLOY™ CM6220 Resin Exhibit improved Dimensional Consistency, helping manufacturers achieve Tighter Tolerances, Better Assembly Fit, and reduced Post-Molding Distortion. These properties are particularly valuable in Precision-Engineered components where alignment and Dimensional Stability are Critical.

Despite its High Stiffness, CYCOLOY™ CM6220 retains good Impact performance and Low-Temperature Ductility. This balance allows the material to withstand Mechanical Stresses and Colder Operating Environments without becoming Excessively Brittle, providing a unique combination of Toughness and Rigidity.

The Resin also incorporates a Non-Chlorinated, Non-Brominated Flame-Retardant System, supporting Environmental Compliance Goals while maintaining the performance Benefits of a Flame-Retardant PC/ABS Alloy. Combined with its Low Warpage and High Modulus, the material is well suited for applications requiring both Structural performance and Dimensional Precision.

RoHS Compliance: CYCOLOY™ CM6220 Resin supports RoHS Requirements, helping manufacturers meet Environmental Objectives while maintaining excellent Engineering performance and Reliability.

Notes:

CYCOLOY™ CM6220 PC/ABS Resin
Mineral Filled Grade
Flame Retardant Grade
Non-Chlorinated Formulation
Non-Brominated Formulation
High Modulus (6 GPa)
Low Warpage Characteristics
High Stiffness
Excellent Low-Temperature Ductility
UL94 - HB @ 1.20 mm ~ 3.00 mm
RoHS Compliant

CYCOLOY™ CM6220 Resin has 0.20 ~ 0.30 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed @ 107

Vicat Softening Temperature Rate

CYCOLOY™ CM6220 , Vicat Softening Temperature rate , B120 = 98

Material MFI / Melt Flow Rate

Melt Flow Rate, 260°C/2.16 kgf = 12

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

CYCOLOY™ CM6220 Flexural Modulus, ISO 178, 2.0 mm/min = 6150 Mpa

CYCOLOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.