CYCOLOY™ CS9610 PC/ABS Resin with Low Smoke Burning Performance

Non-Chlorinated, Non-Brominated FR PC/ABS with Impact Performance

CYCOLOY™ CS9610 Resin is a specialized Non-Chlorinated, Non-Brominated Flame-Retardant PC/ABS Grade engineered to provide Low Smoke Generation, excellent Flame Performance, and reliable Mechanical Properties. Developed for applications where Fire Safety Extends beyond Flame Resistance Alone, this material offers a balanced combination of Toughness, Impact Strength, and reduced Smoke Emission during Combustion.

A Key Feature of CYCOLOY™ CS9610 is its Low Smoke Burning Performance. In applications where Visibility, Occupant Safety, and Smoke Management are important Considerations, the material is formulated to Minimize Smoke Generation while maintaining the Structural and Processing Benefits of a PC/ABS Alloy. This makes it a Strong Candidate for Products requiring enhanced Fire Safety Characteristics.

In addition to its Flame-Retardant Capabilities, CYCOLOY™ CS9610 Resin delivers good Mechanical Strength and Impact Resistance. The material retains the Toughness Associated with Polycarbonate while benefiting from the Processing Versatility of ABS, allowing Molded components to withstand Handling, Assembly Stresses, and Operational Loads without Sacrificing Durability.

The Resin Utilizes a Non-Chlorinated and Non-Brominated Flame-Retardant System, providing a Halogen-Free Solution for manufacturers seeking Environmentally Conscious material Options. Combined with its Low Smoke Characteristics, the formulation supports applications requiring both Regulatory Compliance and Dependable Long-Term Performance.

Processing remains efficient Thanks to the balanced Flow characteristics of the PC/ABS Alloy System. Manufacturers can produce Complex Molded Parts with consistent Quality while benefiting from a material that combines Flame Retardancy, Impact Performance, and reduced Smoke Generation in a Single Engineering Solution.

RoHS Compliance: CYCOLOY™ CS9610 Resin supports RoHS Requirements, helping manufacturers meet Environmental Objectives while maintaining excellent Engineering performance and Reliability.

Notes:

CYCOLOY™ CS9610 PC/ABS Resin
Non-Chlorinated Formulation
Non-Brominated Formulation
Low Smoke Performance
Enhanced Fire Safety Performance
UL94 - V0 @ 2.00 mm ~ 3.00 mm
RoHS Compliant

CYCOLOY™ CS9610 Resin has 0.40 ~ 0.60 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed @ 105

Vicat Softening Temperature Rate

CYCOLOY™ CS9610 , Vicat Softening Temperature rate , B120 = 127

Material MFI / Melt Flow Rate

Melt Flow Rate, 260°C/5.0 kgf = 15

Material Melt Volume Rate, MVR

Melt Volume Rate, MVR at 260°C/5.0 kg = 12

Material Flexural Modulus

CYCOLOY™ CS9610 Flexural Modulus, ISO 178, 2.0 mm/min = 2500 Mpa

CYCOLOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.