CYCOLOY™ CY6414 Resin. Medium Flow Impact Modified PC/ABS Blends

Sustainable, High-Heat Flame Retardant with Enhanced Impact Strength

CYCOLOY™ CY6414 PC/ABS Resin is an Impact Modified, Flame‑Retardant Engineering Thermoplastic developed to provide enhanced Toughness Together with elevated Heat Resistance. This Medium Flow PC/ABS Blend utilizes a Non‑Chlorinated, Non‑Brominated Flame Retardant System, supporting applications that require both Mechanical Durability and Certified Fire Performance.

Mechanical behaviour of CYCOLOY™ CY6414 PC/ABS Resin is defined by its Impact Modified formulation, allowing aomponents to absorb Energy and Resist Fracture under Dynamic Loading Conditions. This Improved Toughness Support use in applications where Mechanical Stress, Handling, or Repeated Impact May Occur during Service.

Thermal performance of this PC/ABS Resin extends beyond standard PC/ABS Grades, Providing Higher Heat Resistance for applications exposed to Elevated Operating Conditions. This capability enables reliable performance where Dimensional Integrity and material Stability must be maintained under Thermal Load.

CYCOLOY™ CY6414 PC/ABS Eesin features a Medium Flow profile that ensures Balanced Mold Filling and Consistent Part Formation. This predictable Flow behavior supports Reliable Processing across Diverse Component Geometries while maintaining Optimal Mechanical Performance.

Flame Safety performance of the unique CYCOLOY™ CY6414 PC/ABS Resin is achieved through a Non‑Halogenated Flame‑Retardant System, aligning with Modern Environmental and Regulatory expectations. NORYL™ CY6414 is UL94‑V0, 1.20 mm ~ 3.00 mm Rated, supporting applications requiring verified Flame Resistance without the use of Brominated or Chlorinated additives.

Material Versatility of CYCOLOY™ CY6414 PC/ABS Resin support use in Components where Impact Strength, Heat Resistance, and Flame performance must be achieved simultaneously. This balance enables Broader Design Flexibility across Engineering Applications.

Environmental and Regulatory alignment is addressed through the RoHS Compliant Status of CYCOLOY™ CY6414 PC/ABS Resin, enabling use in Global Markets where performance Consistency and Compliance Requirements must be Satisfied Together.

Notes :

CYCOLOY™ CY6414 PC/ABS Resin
Non Halogenated Flame Retardant
UL94 Rated
Enhanced Impact Strength
RoHS Compliant

CYCOLOY™ CY6414 Resin has 0.40 ~ 0.80 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed @ 118

Vicat Softening Temperature Rate

CYCOLOY™ CY6414 , Vicat Softening Temperature rate , B120 = 134

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

Melt Volume Rate, MVR at 260°C/5.0 kg = 13

Material Flexural Modulus

CYCOLOY™ CY6414 Flexural Modulus, ISO 178, 2.0 mm/min = 2470 Mpa

CYCOLOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.