BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
CYCOLOY™ HCX1640 Resin. Biocompatible Pharmaceutical & Medical Devices
Balance of Impact, Heat & Flow Performance for Healthcare Industries
CYCOLOY™ HCX1640 PC/ABS Resin is a High Heat PC/ABS with Balanced Flow, Impact Strength & New Developed Improved Knit Line
This Grade are Developed for Healthcare Applications and Passes ISO10993 or USP Class VI
CYCOLOY™ HCX1640 is a Low Viscosity and Bio Compatible Grade
It is from the Family of CYCOLOY™, a Polycarbonate with Acrylonitrile Butadiene Styrene Resin Blend Formulation. A Unique Blend with Both Material Characteristic Advantages
Polycarbonate Resin offers High Heat Resistance, Excellent Ductility at Ambient Temperatures
Meanwhile, Acrylonitrile Butadiene Styrene Resin offers High Gloss, Low Temperature Ductility & Better Chemical Resistance
As a Blend PC/ABS CYCOLOY™, offers
- Toughness - Excellent Mechanical & Electrical Properties, Balanced Impact with Flow
- Excellent Ductility over Temperature Range. The Impact is Maintained Down to -30°C while Heat Resistance can be in the Range of 95°C-140°C
- Balance - Outstanding Process-ability, Good Impact with Flow & Color Freedom
- Stability - Dimensional Stability, Predictable Thermal Stability, Good Chemical Resistance
- Long Term Properties with Excellent UV Stability
- Processing Options - Injection, Blow Molding, Easy of Painting, Recycling
- Ease of Plating, such as Chrome Plating
- Anti-Squeak Behaviour
- Chlorine and Bromine-free Flame Retardancy Available
CYCOLOY™ HCX1640 are Non UL Listed
CYCOLOY™ HCX1640 Resin has 0.40 ~ 0.60 Shrinkage, Flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed @ 108
Vicat Softening Temperature Rate
CYCOLOY™ HCX1640 , Vicat Softening Temperature rate , B120 = 132
Material MFI / Melt Flow Rate
Melt Flow Rate, 260°C/5.0 kgf = 19
Material Melt Volume Rate, MVR
Melt Volume Rate, MVR at 260°C/5.0 kg = 18
Material Flexural Modulus
CYCOLOY™ HCX1640 Flexural Modulus, ISO 178, 2.0 mm/min = 2300 Mpa
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.