ELCRES™ CRX1314TW Resin Transparent Clear Skin Contact Thin Wall

Medium Flow, High Ductility and Skin Contact Healthcare Applications

LNP™ ELCRES™ CRX1314TW Resin is a Skin Contact Thin Wall Polycarbonate Copolymer Resin. Low Temperature Range (down to -30°C)

The Material is Available in Transparent Clear. The Resin offers Improved Chemical, Impact Resistance to Reduce Premature Part Damage and Failures.

LNP™ ELCRES™ CRX1314TW Resin has Medium Flow, High Ductility with Good Light Light Transmission, 1.0 mm @ 89%,ASTM D1003. The Value of Haze, 1.0mm @ 2%, ASTM D1003

Other Advantages
- Skin Contact Healthcare Applications. Passed ISO 10993 Part 5 for Toxicity, Part 10 for Skin Sensitization, and Part 23 for Irritation
- Laser Welding Capability
- Near-Infrared (IR) Transmission Optical Properties
- Withstand Exposure to Harsh Disinfecting Chemicals, such as Quaternary Ammonium Compounds, Alcohols, and Peroxides

The Grade is from the LNP™ ELCRES™ Copolymer CRX Series, which offers a Significantly Improved Chemical Resistant in a Harsh Environmental Stress Cracking

Traditional Resin (such as Polycarbonate, ABS, PBT, and Co-Polyester Resin), are Potentially Incompatible with Highly Aggressive Disinfectants (Quaternary Ammonium Compounds)

The New LNP™ ELCRES™ CRX Resin helps Prevent Stress Cracking and Mitigate Crack Propagation and other Combination Performance such as
- Impact Retention
- Processability
- Flame Retardancy
- Aesthetic

ELCRES™ CRX1314TW is a Transparent Clear ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 129

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B120 = 148

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/2.16 kgf = 11

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/2.16 kg = 10

Material Flexural Modulus

Flexural Modulus, ASTM D790, 1.3 mm/min, MPa = 2250

ELCRES™ CRX1314TW Resin are UL94 - HB@0.75 mm ~ 3.0 mm

ELCRES Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.