ELCRES™ CRX7416U Polycarbonate Opaque Chemical Resistance Ductility

Medium Flow, High Impact and Custom Colorable. UL94-V0 Rated

LNP™ ELCRES™ CRX7416U Resin is a Bio Based Chemical Resistance Polycarbonate. Semi-Crystalline Polycarbonate (PC) Copolymer ELCRES with Excellent Chemical Resistant

The Material is Available in Opaque Color

LNP™ ELCRES™ CRX7416U Resin has Medium Flow, High Ductility, Low Temperature Impact Strength, Thin Wall Flame Retardancy with UV Stability
Offers Limited Biocompatibility according to ISO 109931. Good candidates for Consumer Electronics and Mobility Applications such as Mobile Device Housings and Battery Covers.

The Grade is from the LNP™ ELCRES™ Copolymer CRX Series, which offers a Significantly Improved Chemical Resistant in a Harsh Environmental Stress Cracking

Traditional Resin (such as Polycarbonate, ABS, PBT, and Co-Polyester Resin), are Potentially Incompatible with Highly Aggressive Disinfectants (Quaternary Ammonium Compounds)

The New LNP™ ELCRES™ CRX Resin helps Prevent Stress Cracking and Mitigate Crack Propagation and other Combination Performance such as
- Impact Retention
- Processability
- Flame Retardancy
- Aesthetic

ELCRES™ CRX7416U is a Opaque Color ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 111

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 128

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 13

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 12

Material Flexural Modulus

Flexural Modulus, ISO 178, 2 mm/min, MPa = 1950

ELCRES™ CRX7416U Resin are UL94 - V0@1.0 mm ~ 3.00 mm

ELCRES Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.