ELCRES™ CRX9016E Extrusion Flame Retardant Opaque Polycarbonate

Enhance Release, UV Stable, Low Temperature Impact

Extruded components used in Transportation, Electrical Infrastructure, and Industrial Systems often require a material Capable of combining Flame Resistance, Dimensional Stability, Long-Term Toughness, and Elevated Temperature Performance. ELCRES™ CRX9016E Polycarbonate Copolymer Resin Was developed specifically for these demanding Requirements, offering a specialized Solution for Extrusion applications where reliability is Critical.

Unlike Conventional Injection Molding Grades, ELCRES™ CRX9016E Polycarbonate Copolymer Resin is designed for Extrusion Processing, providing stable Melt behaviour and excellent Profile Consistency during Manufacturing. The Material's Low Shrinkage characteristics Help Improve Dimensional Control, allowing Extruded Products to maintain Tight Tolerances and reliable Fit throughout their Service Life.

One of the Strengths of ELCRES™ CRX9016E Resin is its ability to maintain Long-Term Ductility. Components Produced from ELCRES™ CRX9016E Polycarbonate Copolymer Resin remain resistant to Cracking and Brittle Failure over Extended Periods of use, supporting Durability in demanding Operating Environments. This Characteristic is especially valuable in Structural and Transportation-Related applications where Long Service Life is expected.

Beyond Toughness, ELCRES™ CRX9016E Polycarbonate Copolymer Resin provides excellent Thermal performance with a Heat Resistance of Up to 145°C. The material retains Mechanical Integrity at Elevated Temperatures, making it suitable for applications exposed to Continuous Thermal Loading or Harsh Operating Conditions.

To support Outdoor and Industrial use, ELCRES™ CRX9016E Resin incorporates UV Stabilization, helping maintain appearance and performance when exposed to Prolonged Sunlight. The formulation also includes enhanced Release Characteristics, Improving Processing Efficiency and supporting Smoother Production during Manufacturing.

Another important Advantage of ELCRES™ CRX9016E Polycarbonate Copolymer Resin is its Low-Temperature Impact Performance. Even in Colder Environments, the material is Capable of maintaining Toughness, helping protect components against Accidental Impacts and Operational Stresses.

Safety performance is a Major Feature of ELCRES™ CRX9016E Resin. The material achieves a UL94 V-0 Flame Classification, making it suitable for applications where Stringent Fire Safety requirements must be met alongside Mechanical and Thermal performance Objectives.

For Flame Performance, ELCRES™ CRX9016E Polycarbonate Copolymer Resin Achieves UL94 V-0 Classification from 1.50 mm to 3.00 mm Thickness.

ELCRES™ CRX9016E Polycarbonate Copolymer Resin is also RoHS Compliant, supporting alignment with Global Environmental and Regulatory Requirements.

Notes:

ELCRES™ CRX9016E Polycarbonate Copolymer Resin
Opaque Color
Extrusion Processing Grade
Low Shrinkage
Long-Term Ductility
Heat Resistance Up To 145°C
Low Temperature Impact Performance
Added UV Stabilizer
Enhanced Release Performance
UL94 - V0 @ 1.50 mm ~ 3.00 mm
RoHS Compliant

ELCRES™ CRX9016E is a Opaque Color RoHS Compliance Polycarbonate Resin

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 145

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/2.16 kgf = 4

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/2.16 kg = 4

Material Flexural Modulus

Flexural Modulus, ISO 178, 2 mm/min, MPa = 2100

ELCRES™ CRX9016E Resin are UL94 - V0@1.50 mm ~ 3.00 mm

ELCRES Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.