BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
ELCRES™ DMX1234 Hard Resin Transparent Clear Low DF UV Stabilized
Medium Flow, Improved Scratch Resistance & Low Dielectric Performance
High-Frequency Electronics, Telecommunications Equipment, and Advanced Electrical Systems often require Materials that deliver more than Mechanical performance Alone. ELCRES™ DMX1234 Polycarbonate Copolymer Resin has been developed to provide a unique combination of UV Stability, improved Scratch Resistance, and enhanced Dielectric performance while maintaining the Transparency and Toughness Expected from a Premium Polycarbonate Copolymer.
What makes ELCRES™ DMX1234 Polycarbonate Copolymer Resin Stand out is its Focus on Electrical and Surface-Performance Properties. The material features a Low Dissipation Factor (Low DF), helping support applications where Signal Integrity and Dielectric performance are Important. This makes ELCRES™ DMX1234 Resin an attractive Choice for Advanced Electronic and Communication-Related Components.
In addition to its Electrical Capabilities, ELCRES™ DMX1234 Polycarbonate Copolymer Resin offers improved Scratch Resistance compared with standard Polycarbonate Materials. Components Molded from ELCRES™ DMX1234 Resin are Better Able to maintain their Surface appearance during Handling, Assembly, and Long-Term use, helping preserve both Functionality and Aesthetics.
The Transparent Clear formulation of ELCRES™ DMX1234 Polycarbonate Copolymer Resin provides excellent Visual Clarity while Retaining the Durability Associated with Polycarbonate Technology. This allows Designers to Utilize ELCRES™ DMX1234 Resin in applications where Visibility, Optical Appearance, or Transparent Construction are important Design Requirements.
To support Outdoor Durability and Long-Term Performance, ELCRES™ DMX1234 Polycarbonate Copolymer Resin incorporates an added UV Stabilizer. This helps reduce Discoloration and Property degradation caused by Prolonged Light Exposure, enabling finished Parts to maintain their appearance and performance over time.
Processing is supported by a Medium-Flow Profile, allowing ELCRES™ DMX1234 Resin to achieve a good balance between Mold Filling Efficiency and Dimensional Control. This Versatility enables manufacturers to Mold a Variety of Component Designs while maintaining consistent Quality and Processing Stability.
For Flame Performance, ELCRES™ DMX1234 Polycarbonate Copolymer Resin Achieves UL94 HB Classification from 0.60 mm to 3.00 mm Thickness.
ELCRES™ DMX1234 Polycarbonate Copolymer Resin is also RoHS Compliant, supporting alignment with Global Environmental and Regulatory Requirements.
Typical applications for ELCRES™ DMX1234 Polycarbonate Copolymer Resin include Electronic Housings, Communication Equipment, Transparent Electrical Components, Antenna Systems, Optical Covers, and High-Frequency Devices where Low Dielectric Properties, Surface Durability, and Transparency are required.
Notes:
ELCRES™ DMX1234 Polycarbonate Copolymer Resin
Transparent Clear
Medium Flow
Low DF (Low Dissipation Factor)
Improved Dielectric Performance
Improved Scratch Resistance
Added UV Stabilizer
UL94 - HB @ 0.60 mm ~ 3.00 mm
RoHS Compliant
ELCRES™ DMX1234 is a Transparent Clear RoHS Compliance Polycarbonate Resin
Vicat Softening Temperature Rate
Vicat Softening Temperature rate, B50 = 140
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 15
Material Melt Volume Rate, MVR
N/A
Material Flexural Modulus
Flexural Modulus, ISO 178, 2 mm/min, MPa = 2440
ELCRES™ DMX1234 Resin are UL94 - HB@0.60 mm ~ 3.0 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.