ELCRES™ EXL4312 Resin Opaque Color Reinforced Stiffness Ductility

Unique 20% Glass Filled. Medium Flow with Impact Modified Stiffness

LNP™ ELCRES™ EXL4312 Resin is a Reinforced Stiffness Ductility Polycarbonate Siloxane Copolymer 20% Glass Fiber Reinforced ELCRES with Medium Flow. High impact Copolymer for Wide Applications

The Material is Available in Opaque Color. Good Surface Energy and High Gloss

LNP™ ELCRES™ EXL4312 Resin offers Medium Viscosity with Good Stiffness and Ductility.

The Grade is from the LNP™ ELCRES™ Copolymer EXL Series, which offers a Unique Low Temperature Ductility, Chemical Resistance, and Wide Temperature Impact Strength

LNP™ ELCRES™ EXL Resin Range offers
- Lower Notch Sensitivity
- Excellent Release
- Lower Injection Pressure, Ease of Processing
- Low-Temperature Impact Strength
- Better Weather Ability, Excellent Retention of Mechanical Properties upon Outdoor Exposure
- High Knitline Strength Polycarbonate for a Good Surface Finishing
- Better Heat Aging for Long Term Retention Performance vs other Polycarbonate Resin
- More Hydrolytically Performance
- UL94 Rating

ELCRES™ EXL4312 is a Opaque Color ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 138

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = N/A

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 16

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

Flexural Modulus, ASTM D790, 1.3 mm/min, MPa = 5400

ELCRES™ EXL4312 Resin are Non UL94 Listed

ELCRES Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.