ELCRES™ EXL7414 Polycarbonate Opaque Resin. Siloxane Copolymer Eco-FR

Improved Chemical Resistant & Impact Performance. Thin UL94 V-0 Rating

New LNP™ ELCRES™ EXL7414 Resin is a Better Chemical Resistance Polycarbonate. Siloxane Copolymer ELCRES with Non Chlorinated, Non Brominated Flame Retardant , Medium Flow and Impact Modified Resin

The Material is Available in Opaque Color

LNP™ ELCRES™ EXL7414 Resin has Low Temperature (-40°C) Ductility and Better Chemical Resistance. Rated UL94-V2 @ 0.4 mm ~ 0.59 mm

The Grade is from the LNP™ ELCRES™ Copolymer EXL Series, which offers a Unique Low Temperature Ductility, Chemical Resistance, and Wide Temperature Impact Strength

LNP™ ELCRES™ EXL Resin Range offers
- Lower Notch Sensitivity
- Excellent Release
- Lower Injection Pressure, Ease of Processing
- Low-Temperature Impact Strength
- Better Weather Ability, Excellent Retention of Mechanical Properties upon Outdoor Exposure
- High Knitline Strength Polycarbonate for a Good Surface Finishing
- Better Heat Aging for Long Term Retention Performance vs other Polycarbonate Resin
- More Hydrolytically Performance
- UL94 Rating

ELCRES™ EXL7414 is a Opaque Color ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 105

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 145

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 12

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 11

Material Flexural Modulus

Flexural Modulus, ISO 178, 2 mm/min, MPa = 2130

ELCRES™ EXL7414 Resin are UL94 - V0@0.60 mm ~ 3.00 mm

ELCRES Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.