ELCRES™ EXL7414L Opaque Resin, Low Temperature Ductility. MFI @ 10

Improved Chemical Resistant Non Chlorinated, Non Brominated UL94 Rated

New LNP™ ELCRES™ EXL7414L Resin is a Thinner V2 Rated Polycarbonate. Siloxane Copolymer ELCRES with Medium Flow Impact Modified Resin. Non Chlorinated, Non Brominated Flame Retardant

The Material is Available in Opaque Color

LNP™ ELCRES™ EXL7414L Resin has Low Temperature (-40°C) Ductility and Better Chemical Resistance

The Grade is from the LNP™ ELCRES™ Copolymer EXL Series, which offers a Unique Low Temperature Ductility, Chemical Resistance, and Wide Temperature Impact Strength

LNP™ ELCRES™ EXL Resin Range offers
- Lower Notch Sensitivity
- Excellent Release
- Lower Injection Pressure, Ease of Processing
- Low-Temperature Impact Strength
- Better Weather Ability, Excellent Retention of Mechanical Properties upon Outdoor Exposure
- High Knitline Strength Polycarbonate for a Good Surface Finishing
- Better Heat Aging for Long Term Retention Performance vs other Polycarbonate Resin
- More Hydrolytically Performance
- UL94 Rating

ELCRES™ EXL7414L is a Opaque Color ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 104

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 123

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 11

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 10

Material Flexural Modulus

Flexural Modulus, ISO 178, 2 mm/min, MPa = 2200

ELCRES™ EXL7414L Resin are UL94 - V0@0.60 mm ~ 3.00 mm

ELCRES Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.