EXCRES™ EXL9034 Resin Opaque Color, Low Temperature Ductility. MFI @ 6

Impact Performance. Thin UL94 V-0 / 5VA Rating with UV Stabilizers

When Products must remain Tough in Freezing Environments while still Meeting demanding Flame-Retardant Requirements, ELCRES™ EXL9034 Polycarbonate Resin offers a specialized Solution. This Advanced Flame-Retardant Polycarbonate Grade combines excellent Low-Temperature Toughness, Strong Impact Performance, UV Durability, and Thin-Wall Flame Ratings, making it suitable for applications exposed to Challenging Operating Conditions.

A Defining Characteristic of ELCRES™ EXL9034 Polycarbonate Resin is its ability to maintain Ductility Down to -40°C. Many Materials become Brittle when exposed to Extreme Cold, but ELCRES™ EXL9034 Resin is engineered to retain Toughness and Resist Cracking under Low-Temperature Conditions. This performance makes the material particularly attractive for Outdoor Equipment, Electrical Enclosures, and Transportation-Related applications.

Unlike Conventional Flame-Retardant Polycarbonate Grades, ELCRES™ EXL9034 Polycarbonate Resin is Built on SABIC's EXL Technology Platform, providing enhanced Impact Resistance and Durability. Components Molded from ELCRES™ EXL9034 Resin can withstand demanding Service Conditions while maintaining Structural Integrity and Long-Term Reliability.

Another Notable Advantage of ELCRES™ EXL9034 Polycarbonate Resin is its UV Stabilization Package. The added UV Protection helps preserve appearance and Mechanical performance during prolonged exposure to Sunlight, making ELCRES™ EXL9034 Resin suitable for Outdoor Environments where Weather Resistance is Essential.

Processing Efficiency is supported by a Melt Flow Index (MFI) of approximately 6, providing a balanced Molding Profile that supports consistent Manufacturing and good Part Quality. This allows ELCRES™ EXL9034 Polycarbonate Resin to be used across a Broad range of Molded components requiring both performance and Processability.

From a Fire-Safety Perspective, ELCRES™ EXL9034 Polycarbonate Resin delivers excellent Flame-Retardant Performance. The material Achieves a Thin-Wall UL94 V-0 rating while also offering UL94 5VA Capability, making it an attractive Choice for Electrical, Industrial, and Infrastructure applications where Stringent Flame performance is required.

Available in Opaque Colors, ELCRES™ EXL9034 Resin provides Designers with flexibility while delivering a combination of Cold-Temperature Toughness, Impact Strength, UV Durability, and Flame Resistance rarely Found in a Single material Platform.

For Flame Performance, ELCRES™ EXL9034 Resin Achieves UL94 V-0 Classification from 0.80 mm to 3.00 mm Thickness.

ELCRES™ EXL9034 Polycarbonate Resin is also RoHS Compliant, supporting alignment with Global Environmental and Regulatory Requirements.

Notes:

ELCRES™ EXL9034 Polycarbonate Resin
Opaque Color
MFI @ 6
Excellent Impact Performance
Low Temperature Ductility @ -40°C
Added UV Stabilizer
Thin-Wall Flame Retardant Solution
UL94 - V0 @ 0.80 mm ~ 3.00 mm
UL94 5VA Capable
RoHS Compliant

ELCRES™ EXL9034 is a Opaque Color RoHS Compliance Polycarbonate Resin

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 145

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 7.5

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 6

Material Flexural Modulus

Flexural Modulus, ISO 178, 2 mm/min, MPa = 2100

ELCRES™ EXL9034 Resin are UL94 - V0@ 0.80 mm ~ 3.00 mm

ELCRES Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.