BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
EXCRES™ EXL9334 Resin Opaque Color, Low Temperature Ductility. MFI @ 7
Improved Chemical Resistant & Impact Performance. Thin UL94 V-0 Rating
Designers looking for a material that can withstand Harsh Environments while Meeting demanding Flame-Retardant requirements often Turn to ELCRES™ EXL9334 Polycarbonate Resin. Part of the EXL performance family, this Grade is engineered to deliver a combination of Low-Temperature Toughness, Chemical Resistance, UV Durability, and Thin-Wall Flame performance in a Versatile Opaque Polycarbonate Platform.
One of the most valuable Attributes of ELCRES™ EXL9334 Polycarbonate Resin is its ability to maintain Ductility at Temperatures as Low as -40°C. This Characteristic helps Molded Parts Resist Brittle Failure in Cold-Weather Conditions, making the material suitable for Outdoor Equipment, Electrical Enclosures, and applications exposed to Wide Temperature Variations.
In addition to its Cold-Temperature Performance, ELCRES™ EXL9334 Resin provides improved Impact Strength and Chemical Resistance compared to Conventional Flame-Retardant Polycarbonate Grades. This balance of Toughness and Environmental Durability allows components to maintain performance when exposed to Mechanical Stress, Cleaning Agents, and Challenging Operating Conditions.
The material incorporates an added UV Stabilizer, helping protect Molded Parts from Weathering and Prolonged Sunlight Exposure. as a Result, ELCRES™ EXL9334 Polycarbonate Resin can maintain appearance and Mechanical performance over Extended Outdoor Service Life.
Processing is supported by a Melt Flow Index (MFI) of approximately 7, providing a balanced Flow Profile that supports efficient Molding while maintaining Dimensional Control and Part Consistency. This makes ELCRES™ EXL9334 Resin suitable for a Broad range of Electrical, Industrial, Transportation, and Outdoor applications.
A Key Strength of ELCRES™ EXL9334 Polycarbonate Resin is its Thin-Wall UL94 V-0 Flame Performance, enabling Designers to achieve demanding Fire-Safety Objectives without Sacrificing Impact Toughness or Environmental Resistance. The combination of Flame Retardancy, Low-Temperature Ductility, and UV Stability makes this Grade a Versatile Solution for Advanced Engineering applications.
For Flame Performance, ELCRES™ EXL9334 Resin Achieves UL94 V-0 Classification from 1.50 mm to 3.00 mm Thickness.
ELCRES™ EXL9334 Polycarbonate Resin is also RoHS Compliant, supporting alignment with Global Environmental and Regulatory Requirements.
Notes:
ELCRES™ EXL9334 Polycarbonate Resin
Opaque Color
EXL Performance Flame Retardant Grade
MFI @ 7
Improved Chemical Resistance
Low Temperature Ductility @ -40°C
Added UV Stabilizer
Thin-Wall Flame Retardant Solution
UL94 - V0 @ 1.50 mm ~ 3.00 mm
RoHS Compliant
ELCRES™ EXL9334 is a Opaque Color RoHS Compliance Polycarbonate Resin
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 140
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 10
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kg = 9
Material Flexural Modulus
Flexural Modulus, ISO 178, 2 mm/min, MPa = 2100
ELCRES™ EXL9334 Resin are UL94 - V0@ 1.50 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.