EXCRES™ EXL9334U Polycarbonate Resin Opaque, Low Temperature Ductility

Excellent UV Resistance & Impact Performance. Thin UL94 V-0 Rating

Extreme Environments often demand a material that can remain Tough at Low Temperatures while still providing Strong Flame performance and Outdoor Durability. ELCRES™ EXL9334U Polycarbonate Resin Was developed to address these Challenges through a combination of excellent UV Resistance, Low-Temperature Ductility, Impact Strength, and Non-Halogenated Flame Retardancy.

Based on an Advanced Polycarbonate Platform, ELCRES™ EXL9334U Polycarbonate Resin maintains Impressive Toughness even in Cold Operating Conditions. One of the Standout characteristics of ELCRES™ EXL9334U Resin is its ability to retain Ductility at Temperatures as Low as -40°C, helping components Resist Brittle Failure when exposed to Harsh Outdoor or Cold-Climate Environments.

Weatherability is another Major Advantage of ELCRES™ EXL9334U Polycarbonate Resin. The Resin is engineered with excellent UV Resistance, allowing Parts to maintain appearance and Mechanical performance during prolonged exposure to Sunlight and Outdoor Conditions. This makes ELCRES™ EXL9334U Resin particularly suitable for applications requiring Long Service Life in demanding Environments.

In addition to its Environmental Durability, ELCRES™ EXL9334U Polycarbonate Resin delivers Strong Impact Performance. Components Molded from ELCRES™ EXL9334U Resin can withstand Shocks, Handling, and Mechanical Stresses while maintaining Structural Integrity. This combination of Toughness and Low-Temperature performance provides a reliable Solution for critical applications.

A Key Feature of ELCRES™ EXL9334U Polycarbonate Resin is its Non-Halogenated Flame-Retardant System. The material achieves a Thin-Wall UL94 V-0 rating, allowing Designers to meet demanding Fire Safety requirements while Avoiding Brominated and Chlorinated Flame-Retardant Technologies.

Available in Opaque Colors, ELCRES™ EXL9334U Polycarbonate Resin is suitable for Electrical, Transportation, Industrial, Infrastructure, and Outdoor Equipment applications where Flame Performance, UV Stability, and Impact Resistance must be achieved simultaneously.

For Flame Performance, ELCRES™ EXL9334U Resin Achieves UL94 V-0 Classification from 1.50 mm to 3.00 mm Thickness.

ELCRES™ EXL9334U Polycarbonate Resin is also RoHS Compliant, supporting alignment with Global Environmental and Regulatory Requirements.

Notes:

ELCRES™ EXL9334U Polycarbonate Resin
Opaque Color
Non-Halogenated Flame Retardant Grade
Excellent UV Resistance
Excellent Impact Performance
Low Temperature Ductility @ -40°C
Thin-Wall Flame Retardant Solution
UL94 - V0 @ 1.50 mm ~ 3.00 mm
RoHS Compliant

ELCRES™ EXL9334U is a Opaque Color RoHS Compliance Polycarbonate Resin

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 136

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 9.5

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 9.6

Material Flexural Modulus

Flexural Modulus, ISO 178, 2 mm/min, MPa = 2182

ELCRES™ EXL9334U Resin are UL94 - V0@ 1.50 mm ~ 3.00 mm

ELCRES Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.