ELCRES™ FXG9111T Polycarbonate Resin Transparent Diffusion VisualFx

Diamond Like, Medium Flow, Flame Retardant with Improved Ductility

Within VisualFX Series, ELCRES FXG9111T Polycarbonate Siloxane Copolymer Resin delivers Diamond like Light Diffusion with controlled Transparency. This Effect improves Visual Comfort in visible Light Zones. Resulted in Cleaner Light Spread across Surfaces Consistently

Medium Flow processing helps Complex Geometries Fill more easily during Injection Molding. With Medium Flow performance, ELCRES FXG9111T Polycarbonate Resin Supports Thin features with stable Replication and benefit improves Output Consistency during Production Runs Reliably

Flame Retardant Performance adds Safety Value for Electrical Lighting Components. Improved Ductility in ELCRES FXG9111T Polycarbonate Siloxane Copolymer Resin enhances Toughness during Handling, while, better Ductility helps reduce Crack Risk under Stress events Significantly

ELCRES FXG9111T Polycarbonate Siloxane Copolymer Resin Fits Lighting Housings, Decorative Panels, Diffuser Lenses, Plus Display Elements. VisualFX Diffusion improves Premium Look while supporting functional Illumination Needs. This material assist Brands deliver Consistent Visual Identity Outdoors Indoors Everywhere

UL94 V‑0 Rating at 2.00 mm to 3.00 mm supports Fire Safety targets In Finished Parts and the Grade is ROHS Compliant Material

Notes:

ELCRES FXG9111T Polycarbonate Siloxane Copolymer Resin
Transparent Clear
UL94 - V0 Rated
ROHS Compliant Grade

ELCRES™ FXG9111T is a Transparent Clear ROHS Compliance Polycarbonate Resin

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 125

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 16.2

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 15.2

Material Flexural Modulus

Flexural Modulus, ISO 178, 2 mm/min, MPa = 2202

ELCRES™ FXG9111T Resin are UL94 - V0@ 2.00 mm ~ 3.00 mm

ELCRES Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.