BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
ELCRES™ FXM2271 Polycarbonate Resin VisualFx for Outdoor Applications
Improved Scratch Resistant, Metallic Color Finish and UV Stabilizer
LNP™ ELCRES™ FXM2271 is a Weatherability Metallic Colors Anti Scratch Polycarbonate Siloxane Copolymer. Featuring Metallic Color Finishing
The Material is Available in Opaque Color with Improved Scratch Resistant
LNP™ ELCRES™ FXM2271 Resin offers added UV Additives for Outdoor Applications especially on Adjacent Paint-Free Parts
The Grade is from the LNP™ ELCRES™ Copolymer VisulaFx Series, which offers High Aesthetics
LNP™ ELCRES™ VisualFx Key performance features:
- Ductility and UV stability
- Wide Special Effects to Eliminate the Need for Secondary Process
- High-Quality Finishing such as Illumination, Flame or Glass Effects
- Custom Colored, Avoids the Need for Secondary Painting.
ELCRES™ FXM2271 is a Opaque Color ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 121
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = N/A
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 19
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kg = 17
Material Flexural Modulus
Flexural Modulus, ISO 178, 2 mm/min, MPa = 2370
ELCRES™ FXM2271 Resin are Non UL94 Listed
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.