ELCRES™ HPC17 Polycarbonate Resin Transparent Clear Biocompatible

Vicat Softening Temperature of 170°C for Healthcare Segment. High Heat

LNP™ ELCRES™ HPC17 Resin is a High Vicat Healthcare Polycarbonate. It is Biocompatible Polycarbonate Copolymer for Healthcare Segment, ISO 10993 or USP Class VI with Vicat Softening Temperature of 170°C

The Material is Available in Transparent Clear. Limited Color

LNP™ ELCRES™ HPC17 Resin are High Heat Formulated and Optimized to Reduce Tendency of Yellowing in Transparent Resin within a Broad Processing Windows

The Grade is from the LNP™ ELCRES™ Copolymer EXL Series, which offers a Unique Low Temperature Ductility, Chemical Resistance, and Wide Temperature Impact Strength

SABIC's Polymer Grade of LNP™ ELCRES™ HP, EXL Resins may offers

Sterilization Diversity - Gamma, E-beam, Autoclave, EtO or Low Hydrogen Temperature Hydrogen Peroxide Gas
Biocompatibility - ISO 10993 or USP Class VI
Food contact Compliance - US FDA, European Union Food Contact and Others
Chemical Resistance - Disinfectants, Cleaners, Lipids or IV Solutions
Material Consistency Healthcare Product Policy - Formulation Lock, Management of Change,

ELCRES™ HPC17 is a Transparent Clear ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 152

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B120 = 172

Material MFI / Melt Flow Rate

Melt Flow Rate, 330°C/2.16 kgf = 33

Material Melt Volume Rate, MVR

Melt Volume Rate, 330°C/2.16 kg = 30

Material Flexural Modulus

Flexural Modulus, ISO 178, 2 mm/min, MPa = 2500

ELCRES™ HPC17 Resin are UL94 - HB@0.75 mm ~ 3.0 mm

ELCRES Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.