BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
ELCRES™ ML4412 Resin Opaque Color Reinforced Stiffness Ductility
Unique 20% Glass Reinforced Medium Flow with Impact Modified Toughness
LNP™ ELCRES™ ML4412 Resin is a Reinforced Stiffness Ductility Polycarbonate Siloxane Copolymer 20% Glass Fiber Reinforced ELCRES with Medium Flow. High impact Copolymer for Wide Applications
The Material is Available in Opaque Color
LNP™ ELCRES™ ML4412 Resin offers Medium Viscosity with Good Stiffness and Ductility.
The Grade is from Copolymer Formulated of LNP™ ELCRES™ ML Series. Multi-Purpose Applications with GF20 Reinforced
These Series offer Various Characteristics such as Excellent Surface Aesthetics, Excellent Knit Line Strength, and Excellent Processability with Opportunities for Shorter IM Cycle Times
LNP™ ELCRES™ Applications and Benefits
Electrical : Passing the Glow Wire Test at 850°C, Excellent Thermal Properties, High Impact Resistance
Lighting : Lightweight, Fast Cycle Times and Snap-fit Assembly. Impact Resistance over a Wide Range of Temperatures. High Heat, UV Stability
Telecommunications : UL94 Rated
Automotive Lighting : Tough and Durable
Automotive : Weatherability with ELCRES SLX Series
Appliances : Consistent Processability, High-Quality Glass-like Transparency, and Gloss, Inherent Design Freedom
ELCRES™ ML4412 is a Opaque Color ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 132
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B120 = 142
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 11
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kg = 10
Material Flexural Modulus
Flexural Modulus, ISO 178, 2 mm/min, MPa = 5700
ELCRES™ ML4412 Resin are UL94 - HB@0.40 mm ~ 3.0 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.