ELCRES™ SD3038 Polycarbonate Resin Low Temperature Ductility, -70°C

Opaque Color, Excellent Notched impact Performance. Ease of Processing

LNP™ ELCRES™ SD3038 Polycarbonate Copolymer Resin is a Compounded Engineering Thermoplastic developed for applications that demand Mechanical Toughness in Extremely Low‑Temperature Environments. this material is engineered to Maintain Ductility and Impact Performance at Temperatures as Low as ‑70 °C, supporting reliable service where Conventional Polycarbonates can become Brittle.

Low‑Temperature Mechanical Response is a Defining Feature of LNP™ ELCRES™ SD3038 Polycarbonate Copolymer Resin, providing exceptional Resistance to Cracking and Failure under Cold‑Impact Conditions. excellent Notched Impact Performance enables Components to absorb Mechanical Energy effectively, even in severe Cold‑Weather Applications.

Material Behaviour of LNP™ ELCRES™ SD3038 Polycarbonate Copolymer Resin Reflects a Toughened Copolymer Design that Balances Impact Strength with controlled Stiffness. This Balance support Structural Integrity while Preserving Ductility across a Wide Temperature Range, including Sub‑Zero Operating Conditions.

Processing Characteristics of LNP™ ELCRES™ SD3038 Polycarbonate Copolymer Resin Support Ease of Molding and Consistent Part Formation. The Material’s Flow and Thermal Response Enable Reliable Processing without Special Handling, supporting efficient Manufacturing of Components requiring Tight Mechanical Performance at Low Temperatures.

ELCRES™ SD3038 is UL94‑HB Rated @ 0.40 mm ~ 3.0 mm, indicating suitability for applications where baseline Flame Performance is required without Flame‑Retardant Formulation.

Environmental and Market alignment is Supported by the ROHS Compliant Status of LNP™ ELCRES™ SD3038 Polycarbonate Copolymer Resin, enabling use in Global applications where Extreme Low‑Temperature Toughness, Processing Reliability, and Regulatory Compliance Must be achieved together.

Notes :

LNP™ ELCRES™ SD3038 Polycarbonate Copolymer Resin
Low Tempearture Ductility
Opaque Colored
UL94 Rated
Superb Impact Performance
ROHS Compliant

ELCRES™ SD3038 is a Opaque Color ROHS Compliance Polycarbonate Resin

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 145

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 11

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 9.5

Material Flexural Modulus

Flexural Modulus, ISO 178, 2 mm/min, MPa = 2230

ELCRES™ SD3038 Resin are UL94 - HB@0.40 mm ~ 3.0 mm

ELCRES Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.