ELCRIN™ 61000PUIQ2 Polycarbonate/Polybutylene Terephthalate PCR Resin

Easy Flow 22% Content PCR from IQ Generation 2. Low Temperature Impact

LNP™ ELCRIN™ 61000PUiQ2 Resin is Opaque Color Polycarbonate / Polybutylene Terephthalate (PC/PBT) Resin, Utilizing iQ PBT Generation 2 Technology with Easy Flow.

The Material is Available in Opaque Color with Low Temperature High Impact, Good Chemical Resistance, and Improved Retention of Mechanical Properties under UV Exposure

LNP™ ELCRIN™ 61000PUiQ2 Resin has a 22% Post Consumer Recycled (PCR) Content ( also known as ELCRIN ER011566 )

SABIC's LNP™ ELCRIN™ iQ Resin is a Proprietary Technology which uses Chemical de-Polymerization to Process Single-use Recycled PET Plastics into a Polymer - Polybutylene Terephthalate (PBT)

This Circular Economy Program Resin may Contain up to 60% Recycled Weight Content and offers a Drop-in Solution for Conventional PBT and other Alloy Materials with Similar Applications

Renewable Compounds from Mechanical Recycling or Chemical Recycling
It offers Sustainable Design with Potential to Reduced Energy, Carbon Footprint or Waste Depletion

ELCRIN™ 61000PUiQ2 is a Opaque Color ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 80

Vicat Softening Temperature Rate

ELCRIN™ 61000PUiQ2 : Vicat Softening Temperature rate , B50 = 113

Material MFI / Melt Flow Rate

Melt Flow Rate, 250°C/5.0 kgf = 46

Material Melt Volume Rate, MVR

Melt Volume Rate, 265°C/5.0 kg = 42

Material Flexural Modulus

ELCRIN™ 61000PUiQ2 has a Flexural Modulus, ISO 178, 2 mm/min, MPa = 2125

ELCRIN™ 61000PUiQ2 Resin are UL94 - HB@ 1.50 mm ~ 3.00 mm

ELCRIN Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.