BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
ELCRIN™ CRX1314BTW Resin Transparent Clear Bio Based Skin Contact
Medium Flow, High Ductility and Skin Contact Healtcare Applications
LNP™ ELCRIN™ CRX1314BTW Resin is a Bio Based Skin Contact Polycarbonate Copolymer Resin that can offer Reductions in Carbon Footprint of up to 42 % when compared to the Fossil-based Version in Accordance with ISO 14040/14044 Protocols.
The Material is Available in Transparent Clear. The Resin offers Improved Chemical, Impact Resistance to Reduce Premature Part Damage and Failures.
LNP™ ELCRIN™ CRX1314BTW Resin has Medium Flow, High Ductility with Good Light Light Transmission, 1.0 mm @ 89%, ASTM D1003. The Value of Haze, 1.0mm @ 2%, ASTM D1003
Other Advantages
- Laser Welding Capability
- Near-Infrared (IR) Transmission Optical Properties
- Withstand Exposure to Harsh Disinfecting Chemicals, such as Quaternary Ammonium Compounds, Alcohols, and Peroxides
Traditional Resin (such as Polycarbonate, ABS, PBT, and Co-Polyester Resin), are Potentially Incompatible with Highly Aggressive Disinfectants (Quaternary Ammonium Compounds)
LNP™ ELCRIN™ CRX1314BTW Polycarbonate Resin helps Prevent Stress Cracking and Mitigate Crack Propagation and other Combination Performance such as
- Impact Retention
- Processability
- Flame Retardancy
- Aesthetic
ELCRIN™ CRX1314BTW is a Transparent Clear ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 129
Vicat Softening Temperature Rate
ELCRIN™ CRX1314BTW : Vicat Softening Temperature Rate , B120 = 148
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/2.16 kgf = 11.0
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/2.16 kg = 10
Material Flexural Modulus
ELCRIN™ CRX1314BTW has a Flexural Modulus, D790, 1.3 mm/min, MPa = 2250
ELCRIN™ CRX1314BTW Resin are UL94 - HB@ 0.75 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.