top of page

ELCRIN™ CRX7412UB Polycarbonate Bio Based Synthesized Copolymer Resin

Medium Flow, Non Chlorinated, Non Brominated FR with High Ductility

LNP™ ELCRIN™ CRX7412UB Resin is a Bio Source FR Polycarbonate. Semi-Crystalline Polycarbonate (PC) Copolymer ELCRES with Excellent Chemical Resistant Non Chlorinated, Non Brominated Flame Retardant

The Material is Available in Opaque Color

LNP™ ELCRIN™ CRX7412UB Resin has Medium Flow, High Ductility, Thin Wall Flame Retardancy
Good candidates for replacing incumbent PC, Acrylonitrile-butadiene-styrene (ABS) and polyester/co-polyester materials in Applications such as Diagnostic, Housings, and Monitoring Devices, and Durable Medical Equipment.

The Grade is from the LNP™ ELCRIN™ Copolymer CRX Series, which offers a Significantly Improved Chemical Resistant in a Harsh Environmental Stress Cracking

Traditional Resin (such as Polycarbonate, ABS, PBT, and Co-Polyester Resin), are Potentially Incompatible with Highly Aggressive Disinfectants (Quaternary Ammonium Compounds)

The New LNP™ ELCRIN™ CRX Resin helps Prevent Stress Cracking and Mitigate Crack Propagation and other Combination Performance such as
- Impact Retention
- Processability
- Flame Retardancy
- Aesthetic


ELCRIN™ CRX7412UB is a Opaque Color ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 110

Vicat Softening Temperature Rate

ELCRIN™ CRX7412UB : Vicat Softening Temperature rate , B50 = 129

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 13

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 12

Material Flexural Modulus

ELCRIN™ CRX7412UB has a Flexural Modulus, ISO 178, 2 mm/min, MPa = 1900

ELCRIN™ CRX7412UB Resin are UL94 - V0@ 1.20 mm ~ 3.00 mm

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page