BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
ELCRIN™ EXL1414TB Polycarbonate Bio Based Synthesized Copolymer Resin
Transparent, Low Temperature Ductility, Medium Flow & Easy Release
ELCRIN™ EXL1414TB Polycarbonate Resin is designed for applications where material performance is not only Measured by Strength, but also by Clarity, Usability, and User Interaction under Real Conditions. It Introduces a Transparent, Bio-Based Copolymer System that combines Visual Quality with Mechanical Resilience and Environmental Responsibility.
ELCRIN™ EXL1414TB Polycarbonate Resin offers a Transparent Clear Appearance, allowing Light to pass through with Minimal Distortion while maintaining Structural Strength. This makes it suitable for applications where both Visibility and Protection are required. The Siloxane Copolymer Structure contributes to enhance Impact Resistance, ensuring that Clarity does not come at the Expense of Durability.
One of the Defining characteristics of this material is its Low-Temperature Performance, maintaining Ductility Down to –40 °C. This allows components to Remain Functional and Resistant to Cracking in Cold Environments, where many standard Plastics become Brittle. Combined with Strong Chemical Resistance, the material support reliable performance across a Wide range of Operating Conditions.
ELCRIN™ EXL1414TB Polycarbonate Resin is also optimized for Manufacturing Ease, Featuring Medium Flow and Built-In easy Release Behaviour. These characteristics enable Smooth Mold Filling and Efficient Part Ejection, supporting consistent Production Quality while reducing Cycle Time Variability.
The material reflects a Modern Approach to Polymer Design through its Bio-Based Composition, Incorporating Renewable Feedstock into the Core Structure without Compromising Performance. This allows manufacturers to align Product Development with Sustainability Goals while maintaining Engineering Reliability.
ELCRIN™ EXL1414TB Polycarbonate Resin Achieves UL94 HB Classification from 0.40 mm to 3.00 mm, providing a Baseline Level of Flame performance suitable for General applications while Prioritizing Clarity, Toughness, and Flexibility.
In Application, this Resin is well suited for Transparent Housings, Protective Covers, Optical-Adjacent Components, Consumer Products, and Cold-Environment Parts, where Visual Quality, Durability, and Low-Temperature performance must Work Together Seamlessly.
ELCRIN™ EXL1414TB Polycarbonate Resin is RoHS Compliant, supporting Environmentally Responsible material Selection while delivering High-Impact, Transparent Performance.
Notes :
ELCRIN™ EXL1414TB Polycarbonate Resin
Transparent Bio‑Based Siloxane Copolymer PC
Renewable Feedstock Content
Medium Flow Grade
Easy Release Processing
High Optical Clarity
Low Temperature Impact Strength (to ‑40°C)
UL94 HB Rated (0.4–3.0 mm)
ROHS Compliant
ELCRIN™ EX1414TB is a Transparent Clear RoHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
Vicat Softening Temperature Rate
ELCRIN™ EX1414TB : Vicat Softening Temperature rate , B50 = 138
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 10
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kg = 9
Material Flexural Modulus
ELCRIN™ EX1414TB has a Flexural Modulus, ISO 178, 2 mm/min, MPa = 2120
ELCRIN™ EX1414TB Resin are UL94 - HB@ 0.40 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.