top of page

ELCRIN™ EX1454RCC Polycarbonate Resin. 50% Post Consumer Recycled

UV Stabilized, Opaque, Medium Flow, Low Temperature -40 °C Ductility

LNP™ ELCRIN™ EX1454RCC Resin is Opaque Color Polycarbonate Siloxane Copolymer. Medium Flow, UV Stabilized, Easy Release, Ease of Processing and Good Chemical Resistance

It offers Excellent Low Temperature -40°C Ductility.

LNP™ ELCRIN™ EX1454RCC Resin has a 50% Post Consumer Recycle (PCR) Content

LNP™ ELCRIN™ EXL Resin Range offers
- Low Temperature Ductility
- Lower Notch Sensitivity
- Excellent Release
- Lower Injection Pressure
- Low Temperature Impact
- Better Weather Ability
- High Knitline Strength Polycarbonate
- Better Heat Aging
- Improved Chemical Resistance
- More Hydrolytically Performance
- UL94 Rating

ELCRIN™ EX1454RCC is a Opaque Color ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 121

Vicat Softening Temperature Rate

ELCRIN™ EX1454RCC : Vicat Softening Temperature rate , B50 = 140

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 11

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 10

Material Flexural Modulus

ELCRIN™ EX1454RCC has a Flexural Modulus, ISO 178, 2 mm/min, MPa = 2130

ELCRIN™ EX1454RCC Resin are UL94 - HB@ 0.40 mm ~ 3.00 mm

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page