ELCRIN™ EXL7414B Polycarbonate Copolymer. Synthesized from Bio Source

Opaque Non Chlorinated, Non Brominated FR. -40° C Ductility Temperature

LNP™ ELCRIN™ EXL7414B Resin is Opaque Color Polycarbonate Siloxane Copolymer. More than 50% of the Bio-based Ingredients in Its Formula come from Waste and Do Not Compete with Food Chain

It offers Excellent Low Temperature -40 °C Ductility.

LNP™ ELCRIN™ EXL7414B Resin offers Medium Flow Non Chlorinated, Non Brominated Flame Retardant with Thin Wall Capabilities. Compliant with IEC 62368-1, IT Equipment Standards with Stronger Security Requirements.

Available in Various

LNP™ ELCRIN™ EXL Resin Range offers
- Low-Temperature Ductility
- Lower Notch Sensitivity
- Excellent Release
- Lower Injection Pressure
- Low-Temperature Impact
- Better Weather Ability
- High Knitline Strength Polycarbonate
- Better Heat Aging
- Improved Chemical Resistance
- More Hydrolytically Performance
- UL94 Rating

ELCRIN™ EXL7414B is a Opaque Color ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 105

Vicat Softening Temperature Rate

ELCRIN™ EXL7414B : Vicat Softening Temperature rate , B50 = 123

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 12

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 11

Material Flexural Modulus

ELCRIN™ EXL7414B has a Flexural Modulus, ISO 178, 2 mm/min, MPa = 2100

ELCRIN™ EXL7414B Resin are UL94 - HB@ 0.60 mm ~ 3.00 mm

ELCRIN Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.