top of page

ELCRIN™ EXL8483RCC Polycarbonate Copolymer 75% Post Consumer Recycled

Opaque, Good Impact Performance, Easy Release with Added UV Stabilizer

LNP™ ELCRIN™ EXL8483RCC Resin is a Opaque Polycarbonate Siloxane Copolymer with Good Chemical Resistant & Impact Strength

It offers Similar or Better Ductility & Surface Quality as Standard Polycarbonate. It has Better Gloss Level & High Service Energy

LNP™ ELCRIN™ EXL8483RCC Resin has a 75% Post Consumer Recycled (PCR) Content, Excellent Low Temperature - 30 °C Ductility, Added UV Stabilizers & Easy Release

LNP™ ELCRIN™ EXL Resin Range offers
- Low Temperature Ductility
- Lower Notch Sensitivity
- Excellent Release
- Lower Injection Pressure
- Low Temperature Impact
- Better Weather Ability
- High Knitline Strength Polycarbonate
- Better Heat Aging
- Improved Chemical Resistance
- More Hydrolytically Performance
- UL94 Rating

LNP™ ELCRIN™ EXL8483RCC Resin is UL94 Rated HB - 0.75 mm ~ 3.00 mm

ELCRIN™ EXL8483RCC is a Opaque Color ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 127

Vicat Softening Temperature Rate

ELCRIN™ EXL8483RCC : Vicat Softening Temperature rate , B50 = 144

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 15

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 13

Material Flexural Modulus

ELCRIN™ EXL8483RCC has a Flexural Modulus, ISO 178, 2 mm/min, MPa = 2300

ELCRIN™ EXL8483RCC Resin are UL94 - HB@ 0.75 mm ~ 3.00 mm

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page