BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
ELCRIN™ EXL9253RCC Resin. 50% Post Consumer Recycled Opaque Wide Color
Unique Medium Flow Low Temperature -20~ -30 °C Ductility
LNP™ ELCRIN™ EXL9253RCC Resin is Opaque Color Polycarbonate Siloxane Copolymer. Medium Flow Non Brominated Recycled Flame Retardant
It offers, Excellent Low Temperature -30 °C Ductility. Added UV Stabilizer and Easy Release
LNP™ ELCRIN™ EXL9253RCC Resin has a 50% Post Consumer Recycle (PCR) Content
LNP™ ELCRIN™ EXL Resin Range offers
- Low Temperature Ductility
- Lower Notch Sensitivity
- Excellent Release
- Lower Injection Pressure
- Low Temperature Impact
- Better Weather Ability
- High Knitline Strength Polycarbonate
- Better Heat Aging
- Improved Chemical Resistance
- More Hydrolytically Performance
- UL94 Rating
ELCRIN™ EXL9253RCC is a Opaque Color ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 112
Vicat Softening Temperature Rate
ELCRIN™ EXL9253RCC : Vicat Softening Temperature rate , B50 = 128
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 15
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kg = 14
Material Flexural Modulus
ELCRIN™ EXL9253RCC has a Flexural Modulus, ISO 178, 2 mm/min, MPa = 2190
ELCRIN™ EXL9253RCC Resin are UL94 - V0@ 1.00 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.