ELCRIN™ SLX1271DB Polycarbonate Bio Based Synthesized Copolymer Resin

Automotive Enhanced UV Stabilizer Diffusive Color in Low Viscosity

LEXAN™ SLX1271DB Resin is a Selective Plating Bio Source Polycarbonate. Siloxane Copolymer LEXAN with Low Viscosity

The Material is Available in Diffusive Color

LEXAN™ SLX1271DB Resin has Enhanced UV Stabilizer. Best for Selective Plating in Auto Industries

The LEXAN™ SLX Resins Portfolio is an Amorphous Family of Polycarbonate Copolymer Resin Blends, offering Outstanding Retention of Color, Gloss, Transparency and Toughness after Weathering combined with the Heat and Impact Performance Associated with LEXAN™ Resins.

This Unique Copolymer creates a Self Protecting Layer upon Exposed to UV Light, Dramatically increasing the Resistance to UV Degradation Compared to Standard UV Stabilized Polycarbonate.

LEXAN™ SLX Resin Range offers
- Reduce Finishing Cost. Non Painting Required or UV Coatings
- Outstanding Retention of Transparency, Color, Gloss
- High Refractive Index
- Improved Depth of Color
- Retention of Mechanical Properties
- Lower Environmental Emissions

ELCRIN™ SLX1271DB is a Diffusive Color ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 123

Vicat Softening Temperature Rate

ELCRIN™ SLX1271DB : Vicat Softening Temperature rate , B50 = 138

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 18

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 16

Material Flexural Modulus

ELCRIN™ SLX1271DB has a Flexural Modulus, ISO 178, 2 mm/min, MPa = 2255

ELCRIN™ SLX1271DB Resin are Non UL94 Listed

ELCRIN Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.