ELCRIN™ SLX2271TB Polycarbonate Bio Based ISCC+ Certified Resin

Enhanced UV Stabilizer, Easy Release, Transparent Clear Medium Flow

LEXAN™ SLX2271TB Resin is a ISCC Certified Bio Based Polycarbonate. Siloxane Copolymer LEXAN with Medium Flow

The Material is Available in Transparent Clear with Easy Release

LEXAN™ SLX2271TB Resin has Enhanced UV Stabilizer and ISCC+ Certified on it's Bio-based Feedstocks Renewable Content

The LEXAN™ SLX Resins Portfolio is an Amorphous Family of Polycarbonate Copolymer Resin Blends, offering Outstanding Retention of Color, Gloss, Transparency and Toughness after Weathering combined with the Heat and Impact Performance Associated with LEXAN™ Resins.

This Unique Copolymer creates a Self Protecting Layer upon Exposed to UV Light, Dramatically increasing the Resistance to UV Degradation Compared to Standard UV Stabilized Polycarbonate.

LEXAN™ SLX Resin Range offers
- Reduce Finishing Cost. Non Painting Required or UV Coatings
- Outstanding Retention of Transparency, Color, Gloss
- High Refractive Index
- Improved Depth of Color
- Retention of Mechanical Properties
- Lower Environmental Emissions

ELCRIN™ SLX2271TB is a Transparent Clear ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 124

Vicat Softening Temperature Rate

ELCRIN™ SLX2271TB : Vicat Softening Temperature rate , B50 = 139

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 17.5

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 16

Material Flexural Modulus

ELCRIN™ SLX2271TB has a Flexural Modulus, ISO 178, 2 mm/min, MPa = 2450

ELCRIN™ SLX2271TB Resin are UL94 - V2@ 1.00 mm ~ 3.00 mm

ELCRIN Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.