top of page

ELCRIN™ WF006LIQ PBT Resin Opaque Color FDA 30% Reinforced PCR

Food Contact Compliant. More than 37% Post Consumer Recycled Content

LNP™ ELCRIN™ WF006LiQ Resin is Opaque Color Polybutylene Terephthalate (PBT). NSF Food Contact Compliant Resin with 30% Glass Fiber Reinforced

The Material, is Available in Opaque Color, Dimension Stability and Excellent Strength, Stiffness. Under Testing for Potable Water Approval : ACS,KTW, WRAS, W270, NSF.

LNP™ ELCRIN™ WF006LiQ Resin has more than 37% Post Consumer Recycle (PCR) Content though Chemical Recycling for FDA Applications

LNP™ ELCRIN™ iQ Resin are produced with Technology which uses De-Polymerization to process Single Used Recycled PET Plastic into Polybutylene Terephthalate (PBT)

They may contained up to 60% Recycled Weight Content
LNP™ ELCRIN™ Reduces Carbon and Energy Footprint while offering Similar Properties of Virgin Material

ELCRIN™ WF006LiQ is a Opaque Color ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 203

Vicat Softening Temperature Rate

ELCRIN™ WF006LiQ : Vicat Softening Temperature rate , B50 = N/A

Material MFI / Melt Flow Rate

Melt Flow Rate, 250°C/5.0 kgf = 52

Material Melt Volume Rate, MVR

Melt Volume Rate, 250°C/5.0 kg = 38

Material Flexural Modulus

ELCRIN™ WF006LiQ has a Flexural Modulus, ISO 178, 2 mm/min, MPa = 9100

ELCRIN™ WF006LiQ Resin are Non UL94 Listed

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page