top of page

GELOY™ FXTW26SK ASA Resin. Extreme Weather Series with High Heat

Visual FX Formulation. Reduce Cost of Painting or Secondary Process

GELOY™ FXTW26SK ASA Resin is a Injection Moulding Grade for Wide Outdoor Applications

It is from Visual FX Series which offers Color Effect or Sparkle Effect which offers :
- Increase Consumer Appeal with the Exciting Look of Metal Flakes Shining Deep
- Various Concentration and Size of Flakes and Wide Range of Base Colors
- Eye-Popping Effect
- Lower Cost Solution due to Elimination of Secondary Operations

GELOY™ FXTW26SK is Best for Injection Molding for Extreme Weather Applications

GELOY™ PC/ASA Blends provide Improved Heat and Mechanical Performance, including up to 5 times the Room Temperature Impact Performance and up to 20 degrees Higher Heat Deflection of Standard ASA Products.

These Properties are Particularly Important for Applications that Typically Require a PC or PC/ABS Resin but their Environment requires UV Protection for Both Mechanical and Aesthetic Performance.

GELOY FXTW26SK ASA Resin has 0.4 ~ 0.7 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 84

Vicat Softening Temperature Rate

SABIC GELOY™ FXTW26SK Vicat Softening Temperature Rate , B50 = 95

Material MFI / Melt Flow Rate

Melt Flow Rate, 220°C/10.0 kgf = 12

Material Melt Volume Rate, MVR

Melt Volume Rate, 260°C/5.0 kgf = 13

Material Flexural Modulus

GELOY™ FXTW26SK Flexural Modulus, ASTM D790, 1.3 mm/min = 2450 Mpa

GELOY™ FXTW26SK Resin are Non UL Rated

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

​

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, LNP, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All Rights Reserved.

​

bottom of page