BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
: Vietnam : Indonesia : Thailand : Malaysia : Philippine : India
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
GELOY™ FXW751SK ASA/PC Resin. Spackle Metallic Extreme Weather Series
Visual FX Formulation High Heat with better High Impact Strength
GELOY™ FXW751SK PC/ASA Resin is a Injection Moulding Grade for Wide Outdoor Applications
It is from Visual FX Series which offers Sparkle Effect which offers :
- Increase Consumer Appeal with the Exciting Look of Metal Flakes Shining Deep
- Various Concentration and Size of Flakes and Wide Range of Base Colors
- Eye-Popping Effect
- Lower Cost Solution due to Elimination of Secondary Operations
GELOY™ FXW751SK is Best for Injection Molding for Extreme Weather Applications
GELOY™ PC/ASA Blends provide Improved Heat and Mechanical Performance, including up to 5 times the Room Temperature Impact Performance and up to 20 degrees Higher Heat Deflection of Standard ASA Products.
These Properties are Particularly Important for Applications that Typically Require a PC or PC/ABS Resin but their Environment requires UV Protection for Both Mechanical and Aesthetic Performance.
GELOY FXW751SK PC/ASA Resin has 0.5 ~ 0.7 Shrinkage, Flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 89
Vicat Softening Temperature Rate
SABIC GELOY™ FXW751SK Vicat Softening Temperature Rate , B50 = 108
Material MFI / Melt Flow Rate
Melt Flow Rate, 220°C/10.0 kgf = 8.3
Material Melt Volume Rate, MVR
Melt Volume Rate, 220°C/10.0 kgf = 7
Material Flexural Modulus
GELOY™ FXW751SK Flexural Modulus, ASTM D790, 1.3 mm/min = 2900 Mpa
GELOY™ FXW751SK Resin are Non UL Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, LNP, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All Rights Reserved.