LEXAN™ 143X Polycarbonate. General Purpose Transparent Medium Flow

Easy Release, & UV Stabilizer. Available in Transparent Clear or Color

LEXAN™ 143X Resin is a Copolymer UV Stabilized Polycarbonate. Medium Flow with Easy Release

The Material is Available in Transparent Clear

LEXAN™ 143X Resin offers High Viscosity and Non UL94 Rated

The Grade is from Copolymer Formulated of LEXAN™ 100 Series. Multi-Purpose Applications, Non-Reinforced, Non Added Flame Retardancy with Wide Range of Viscosity.

These Series offer Various Characteristics such as Easy Release, Hydrolytic Stability, UV Stabilizers. Food contact Compliant and Others

LEXAN™ Applications and Benefits

Eletrical : Passing the Glow Wire Test at 850°C, Excellent Thermal Properties, High Impact Resistance
Lighting : Lightweight, Fast Cycle Times and Snap-fit Assembly. Impact Resistance over a Wide Range of Temperatures. High Heat, UV Stability
Telecomunications : UL94 Rated
Eyewear : Optical Quality, High Refractive Index, Low Specific Gravity
Automotive Lighting : Tough and Durable
Automotive : Weatherability with LEXAN SLX Series
Appliances : Consistent Processability, High-Quality Glass-like Transparency, and Gloss, Inherent Design Freedom
Packaging : Excellent Taste and Aroma Protection in the Compliance with FDA and European Food Contact Regulations
Healthcare : Multiple sterilization options

LEXAN™ 143X is a Transparent Clear ROHS Compliance Polycarbonate Resin

LEXAN™ 143X Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 128°C

Vicat Softening Temperature of LEXAN™ Polycarbonate 143X Resin

Vicat Softening Temperature Rate, B50 = 141

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 12

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2310

LEXAN™ 143X Copolymer Resin has 0.4 ~ 0.8 Shrinkage, Flow, 3.2 mm. %

LEXAN™ 143X Polycarbonate Resin are Non UL94 Rated

LEXAN COPOLYMER Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.