top of page

LEXAN™ CFR5630D Prematched Diffusion Colored Polycarbonate Resin

Passed FAR25.853. Non-Brominated Non-Chlorinated Flame Retardant

LEXAN™ CFR5630D Resin is a Thin Wall EFR Polycarbonate. Copolymer LEXAN with ECO FR and High Viscosity

The Material is Available in Transparent Clear Diffusion 5 Prematched with added UV Stabilizer

LEXAN™ CFR5630D Resin meets OEM Toxicity, FAR25.853 Smoke Density and 60 Second Vertical Burn

The Grade is from LEXAN™ Copolymer CFR Series which may offers Non-Chlorinated, Non-Brominated Flame Retardant, Thin Wall Transparent Clear UL94 V-0 Rating and Improved Flow Rate

These Series are Not added Additive with Unique Performance in Specialized Monomers Technology

LEXAN™ Copolymers Types

General Standard LEXAN Copolymers
EXL Series : Low-Temperature Ductility, Chemical Resistance, Heat Aging
SLX : UV Weathering, Chemical Resistance
XHT : High Heat Resistance, Improved Flow & Impact
CFR : Thin Wall Flame Retardant
FST : Flame, Smoke & Toxicity
HFD : Superior Flow, Ductility, Low-Temperature Processing

LEXAN™ CFR5630D is a Transparent Clear ROHS Compliance Polycarbonate Resin

LEXAN™ CFR5630D Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 120°C

Vicat Softening Temperature of LEXAN™ Polycarbonate CFR5630D Resin

Vicat Softening Temperature Rate, B50 = 136

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 5

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 5

Material Flexural Modulus

Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2500

LEXAN™ CFR5630D Copolymer Resin has 0.55 ~ 0.75 Shrinkage, Flow, 3.2 mm. %

LEXAN™ CFR5630D Polycarbonate Resin are UL94 - V0@ 1.0 mm ~ 3.0 mm

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page