LEXAN™ CXT17UV Transparent Polycarbonate Resin. Copolymer High Heat

UV Stabilized, Transparent Clear. Vicat Softening Temperature of 170°C

LEXAN™ CXT17UV Resin is a Copolymer High Temperature Polycarbonate. Copolymer LEXAN with Added UV Stabilizer, Vicat of 170°C and Crystal Clear Transparency.

The Material is Available in Limited Transparent Clear with UV Stabilzer

LEXAN™ CXT17UV Resin Optimized to have a Broad Processing Window with Limited Yellowing. It offers a Unique High Transparency in the UV-Visible Spectrum Range.

The Grade is from the LEXAN™ Copolymer CXT Series, which offers a Unique Balance of High-Temperature Resistance, High Flow, and Excellent Stability under Extreme Molding Conditions, together with High Refractive Index over 16.

Typical Products include Lenses and Small Sensors that Detect Visible Light; in Healthcare, the Materials Answer the Call for Excellent Optical Quality and the Ability to Resist High Temperatures involved, for example, when Over-Molding Clear Face Shields with Silicone Rubber.

With Vicat B120 Softening Temperatures as High as 190°C and Glass Transition Temperatures (Tg) of up to 195°C, LEXAN™ CXT Resins can provide Converters with the Potential to Injection Mold parts that can withstand demanding Assembly Processes, such as Cold Reflow or Wave Soldering onto Printed Circuit Boards. Parts will also stand up to Prolonged Exposure to High Service Temperatures.

LEXAN CXT Resins, which can have a Refractive Index (RI) over 1.6 as well as High Transparency (Greater than 89% in the Visible and Infrared Spectra at a Thickness of 1 mm), can help Enable the Production of very Small Lenses (such as used in mobile phones) that can be Assembled onto a PCB that then goes through various Soldering Operations. The very Good Thermal Stability of the LEXAN CXT resins can Help Prevent Deformation or Disation.

LEXAN™ CXT17UV is a Transparent Clear ROHS Compliance Polycarbonate Resin

LEXAN™ CXT17UV Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 152°C

Vicat Softening Temperature of LEXAN™ Polycarbonate CXT17UV Resin

Vicat Softening Temperature Rate, B120 = 172

Material MFI / Melt Flow Rate

Melt Flow Rate, 330°C/2.16 kgf = 33

Material Melt Volume Rate, MVR

Melt Volume Rate, 330°C/2.16 kg = 30

Material Flexural Modulus

Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2500

LEXAN™ CXT17UV Copolymer Resin has 0.70 ~ 0.95 Shrinkage, Flow, 3.2 mm. %

LEXAN™ CXT17UV Polycarbonate Resin are UL94 - HB@ 1.5 mm ~ 3.0 mm

LEXAN COPOLYMER Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.