LEXAN™ EXL4311 Resin Opaque Color, Low Temperature Ductility. MVR @ 9

High Energy Service & Gloss. 9% Glass Reinforced with High Stiffness

LEXAN™ EXL4311 Resin is a Glass Reinforced Filled UL94 Polycarbonate. Siloxane Copolymer LEXAN with High Viscosity, High Gloss Finishing & High Service Energy

The Material is Available in Opaque Color

LEXAN™ EXL4311 Resin has Low Temperature (0°C) Ductility with 9% Glass Reinforced, Hydrolytic Stability, High Strength and Stiffness

The Grade is from the LEXAN™ Copolymer EXL Series, which offers a Unique Low Temperature Ductility, Chemical Resistance, and Wide Temperature Impact Strength

LEXAN™ EXL Resin Range offers
- Lower Notch Sensitivity
- Excellent Release
- Lower Injection Pressure, Ease of Processing
- Low-Temperature Impact Strength
- Better Weather Ability, Excellent Retention of Mechanical Properties upon Outdoor Exposure
- High Knitline Strength Polycarbonate for a Good Surface Finishing
- Better Heat Aging for Long Term Retention Performance vs other Polycarbonate Resin
- More Hydrolytically Performance
- UL94 Rating

LEXAN™ EXL4311 is a Opaque Color ROHS Compliance Polycarbonate Resin

LEXAN™ EXL4311 Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at N/A°C

Vicat Softening Temperature of LEXAN™ Polycarbonate EXL4311 Resin

N/A

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 9

Material Flexural Modulus

Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 3500

LEXAN™ EXL4311 Copolymer Resin has Non Listed Shrinkage, Flow, 3.2 mm. %

LEXAN™ EXL4311 Polycarbonate Resin are Non UL94 Rated

LEXAN COPOLYMER Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.