LEXAN™ EXL4419 Resin Opaque Color, Low Temperature Ductility. MVR @ 9

Good Impact Chemical Resistant. High Stiffness 9% Glass Reinforced

LEXAN™ EXL4419 Resin is a Glass Reinforced Filled UL94 Polycarbonate. Siloxane Copolymer LEXAN with Medium Viscosity and Better Chemical Resistance

The Material is Available in Opaque Color Added Easy Release

LEXAN™ EXL4419 Resin has Low Temperature (0°C) Ductility with 9% Glass Reinforced, High Strength and Stiffness

The Grade is from the LEXAN™ Copolymer EXL Series, which offers a Unique Low Temperature Ductility, Chemical Resistance, and Wide Temperature Impact Strength

LEXAN™ EXL Resin Range offers
- Lower Notch Sensitivity
- Excellent Release
- Lower Injection Pressure, Ease of Processing
- Low-Temperature Impact Strength
- Better Weather Ability, Excellent Retention of Mechanical Properties upon Outdoor Exposure
- High Knitline Strength Polycarbonate for a Good Surface Finishing
- Better Heat Aging for Long Term Retention Performance vs other Polycarbonate Resin
- More Hydrolytically Performance
- UL94 Rating

LEXAN™ EXL4419 is a Opaque Color ROHS Compliance Polycarbonate Resin

LEXAN™ EXL4419 Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 137°C

Vicat Softening Temperature of LEXAN™ Polycarbonate EXL4419 Resin

Vicat Softening Temperature Rate, B50 = 145

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 7.5

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 6

Material Flexural Modulus

Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 3300

LEXAN™ EXL4419 Copolymer Resin has 0.20 ~ 0.60 Shrinkage, Flow, 3.2 mm. %

LEXAN™ EXL4419 Polycarbonate Resin are UL94 - HB@ 0.40 mm ~ 3.00 mm

LEXAN COPOLYMER Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.