LEXAN™ EXL5429S Copolymer Polycarbonate Resin. 9% Glass Reinforced

Opaque Non-Brominated Non-Chlorinated Flame Resistance. Easy Release

LEXAN™ EXL5429S Resin is a Low Temp Ductility Polycarbonate. Non-Brominated Non-Chlorinated Flame Resistance Siloxane Copolymer LEXAN with Low ~ Medium Viscosity

The Material is Available in Opaque Color Added Sepcial Improved Easy Release

LEXAN™ EXL5429S Resin has Low Temperature (0°C) Ductility with 9% Glass Reinforced, added UV Stabilizer and High Stiffness

The Grade is from the LEXAN™ Copolymer EXL Series, which offers a Unique Low Temperature Ductility, Chemical Resistance, and Wide Temperature Impact Strength

LEXAN™ EXL Resin Range offers
- Lower Notch Sensitivity
- Excellent Release
- Lower Injection Pressure, Ease of Processing
- Low-Temperature Impact Strength
- Better Weather Ability, Excellent Retention of Mechanical Properties upon Outdoor Exposure
- High Knitline Strength Polycarbonate for a Good Surface Finishing
- Better Heat Aging for Long Term Retention Performance vs other Polycarbonate Resin
- More Hydrolytically Performance
- UL94 Rating

LEXAN™ EXL5429S is a Opaque Color ROHS Compliance Polycarbonate Resin

LEXAN™ EXL5429S Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 145°C

Vicat Softening Temperature of LEXAN™ Polycarbonate EXL5429S Resin

Vicat Softening Temperature Rate, B120 = 156

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 5

Material Flexural Modulus

Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 3300

LEXAN™ EXL5429S Copolymer Resin has 0.50 ~ 0.60 Shrinkage, Flow, 3.2 mm. %

LEXAN™ EXL5429S Polycarbonate Resin are UL94 - V0@ 1.50 mm ~ 3.00 mm

LEXAN COPOLYMER Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.