LEXAN™ FST9436 Opaque Color Polycarbonate Resin. Flame Smoke Toxicity

Available in Medium Viscosity. Flame Retardant and added UV Stabilizer

LEXAN™ FST9436 is a Flame Smoke Toxicity Polycarbonate. Flame Resistance Siloxane Copolymer LEXAN with Medium Viscosity and added UV Stabilizer

The Material is Available in Opaque Color

LEXAN™ FST9436 Resin meets OSU65/65 Compliant and an Ideal Candidate for Aircraft Interior with Heat Release, Fire, Smoke and Toxicity.

The Grade is from the LEXAN™ Copolymer FST Series, which offers Rail and Aerospace Application Compliant. It Meets OSU 55/55 Requirements and EN45545 Rail Norm. It offers Superior Chemical Resistance vs. Standard PC, and can be Colored in a Range of High-Chroma Hues including Bright Whites. Attaining Unprecedented Levels of Safety and Compliance without
Compromising Performance.

LEXAN™ FST Key performance features:

- Compliance with FAR 25.853a and 25.853d Requirements
- Compliance with OSU 55/55 Standard
- Ductility and UV stability
- Weight-out for Greater Fuel Conservation
- High Flow Capabilities, Enable Large Parts without Marks, Texture Defaults, Flow Lines and other Surface Defects.
- Custom Colored, Avoids the Need for Secondary Painting.

LEXAN™ FST9436 is a Opaque Color ROHS Compliance Polycarbonate Resin

LEXAN™ FST9436 Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 134°C

Vicat Softening Temperature of LEXAN™ Polycarbonate FST9436 Resin

Vicat Softening Temperature Rate, B50 = 154

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 10

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 9

Material Flexural Modulus

Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2280

LEXAN™ FST9436 Copolymer Resin has 0.60 ~ 0.80 Shrinkage, Flow, 3.2 mm. %

LEXAN™ FST9436 Polycarbonate Resin are Non UL94 Rated

LEXAN COPOLYMER Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.