LEXAN™ FXD9810 Resin Transparent Clear, Low Temperature Ductility

Improved Impact Strength. UL94 Rated HB with Unique MFI @ 30

LEXAN™ FXD9810 Resin is a Super High Flow Polycarbonate. Non-Brominated Non-Chlorinated Flame Resistance Siloxane Copolymer LEXAN

The Material is Available in Transparent Clear

LEXAN™ FXD9810 Resin has Low Temperature (0°C) Ductility with Superior High Flow and Ease of Processing

The Grade is from the LEXAN™ Copolymer Series, which offers a Unique Low Temperature Ductility, Chemical Resistance, and Wide Temperature Impact Strength

LEXAN™ Applications and Benefits

Eletrical : Passing the Glow Wire Test at 850°C, Excellent Thermal Properties, High Impact Resistance
Lighting : Lightweight, Fast Cycle Times and Snap-fit Assembly. Impact Resistance over a Wide Range of Temperatures. High Heat, UV Stability
Telecomunications : UL94 Rated
Eyewear : Optical Quality, High Refractive Index, Low Specific Gravity
Automotive Lighting : Tough and Durable
Automotive : Weatherability with LEXAN SLX Series
Appliances : Consistent Processability, High-Quality Glass-like Transparency, and Gloss, Inherent Design Freedom
Packaging : Excellent Taste and Aroma Protection in the Compliance with FDA and European Food Contact Regulations
Healthcare : Multiple sterilization options

LEXAN™ FXD9810 is a Transparent Clear ROHS Compliance Polycarbonate Resin

LEXAN™ FXD9810 Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 118°C

Vicat Softening Temperature of LEXAN™ Polycarbonate FXD9810 Resin

N/A

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 30

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 29

Material Flexural Modulus

Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2250

LEXAN™ FXD9810 Copolymer Resin has 0.40 ~ 0.80 Shrinkage, Flow, 3.2 mm. %

LEXAN™ FXD9810 Polycarbonate Resin are UL94 - V0@1.20 mm ~ 2.20 mm

LEXAN COPOLYMER Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.