LEXAN™ HFD1413 Unique Transparent Clear Polycarbonate Copolymer Resin

Non Reinforced. Low Temperature -30 °C Ductility with Good High Flow

LEXAN™ HFD1413 Resin is a Copolymer High Flow Polycarbonate. Non Reinforced Siloxane Copolymer LEXAN with High Flow

The Material is Available in Transparent Clear

LEXAN™ HFD1413 Resin has Low Temperature (-30°C) Ductility

The Grade is from the LEXAN™ Copolymer HFD Series are Engineered to Provide up to 40 % Higher Flow at the Molecular Weight than Standard Lexan Resin, thereby Preserving Desirable Mechanical Properties. Higher Flow assists the User in creating Thinner Wall Parts such as Appliances and Device Housings without the Risk of Cracking upon Removal from the Mold.

LEXAN™ HFD Resin Range offers
- Reduces Molded-in Stress to Avoid Birefringence (“Rainbow” Effect) in Optical Applications
- Lower Notch Sensitivity - Enable Designs with Sharp Notches and Corners without Fear of Breakage.
- Superior High Flow - Allow Faster Processing Speeds for Higher Productivity.
- Aesthetically - LEXAN™ HFD Copolymers Flow Around and Hide the Fibers, producing Surface Gloss that is 30-40 % Higher compared to a Standard Glass Filled PC.
- High Ductility at Colder Temperatures (down to -40°C)
- High Clarity, Even at Low Temperature
- Ease of Processing - 20 Degrees Lower than Standard PC with the Same Ductility
- Easy Release

LEXAN™ HFD1413 is a Transparent Clear ROHS Compliance Polycarbonate Resin

LEXAN™ HFD1413 Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 114°C

Vicat Softening Temperature of LEXAN™ Polycarbonate HFD1413 Resin

Vicat Softening Temperature Rate, B50 = 136

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 11

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 10

Material Flexural Modulus

Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2090

LEXAN™ HFD1413 Copolymer Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

LEXAN™ HFD1413 Polycarbonate Resin are UL94 - HB@ 0.75 mm ~ 3.00 mm

LEXAN COPOLYMER Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.