BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +60 12 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
LEXAN™ HPF0 Opaque Color Polycarbonate Resin. Biocompatible Healthcare
General Purpose Healthcare ISO 10993 or USP Class VI. High Flow
LEXAN™ HPF0 Resin is a Biocompatible Healthcare Polycarbonate Polycarbonate. It is Biocompatible Material for Healthcare Segment & Specific for Repeated Autoclave or EtO Sterilization
The Material is Available in Opaque Color
LEXAN™ HPF0 Resin are High Flow Formulated
The Grade is from the LEXAN™ Copolymer EXL Series, which offers a Unique Low Temperature Ductility, Chemical Resistance, and Wide Temperature Impact Strength
SABIC's Polymer Grade of LEXAN™ HP, EXL Resins offers
Sterilization Diversity - Gamma, E-beam, Autoclave, EtO or Low Hydrogen Temperature Hydrogen Peroxide Gas
Biocompatibility - ISO 10993 or USP Class VI
Food contact Compliance - US FDA, European Union Food Contact and Others
Chemical Resistance - Disinfectants, Cleaners, Lipids or IV Solutions
Material Consistency Healthcare Product Policy - Formulation Lock, Management of Change,
LEXAN™ HPF0 is a Opaque Color ROHS Compliance Polycarbonate Resin
LEXAN™ HPF0 Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 110°C
Vicat Softening Temperature of LEXAN™ Polycarbonate HPF0 Resin
Vicat Softening Temperature Rate, B50 = 135
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 40
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kg = 38
Material Flexural Modulus
Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2180
LEXAN™ HPF0 Copolymer Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %
LEXAN™ HPF0 Polycarbonate Resin are Non UL94 Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.